Air Intake Filter Performance Test System
The Air Intake Filter Test System is designed to evaluate the filtration performance, airflow characteristics, and dust holding capacity of air intake filters used in engines and industrial systems. The system fully complies with international standards such as ISO 5011, SAE J726, and GB/T 12485, providing accurate and repeatable results for both research and production quality control.
Applications
This test system is widely used for:
Performance evaluation of automotive air filters, industrial air filters, and engine intake systems.
R&D testing for new filter products and materials.
Quality inspection and certification by third-party laboratories.
Comparison and validation between domestic and international filter brands.
Conforming Standards
The system meets multiple global standards:
ISO 5011: Inlet air cleaning equipment for internal combustion engines and compressors.
SAE J726: Air cleaner test code for automotive and diesel engine filters.
GB/T 12485: Test methods for air cleaners used in internal combustion engines.
ISO 12103-1: Test dusts (A2 Fine and A4 Coarse) used for efficiency and dust holding capacity evaluation.
Key Test Procedures and Parameters
1. Restriction and Differential Pressure Test
Purpose: Measures resistance variation at different airflow rates to generate the pressure drop-airflow curve.
Method: Five flow rate points (50%–150% of rated flow) are selected; corresponding pressure drops (ΔP) are recorded.
Application: Evaluates airflow capacity and ensures the filter does not excessively restrict engine intake.
2. Initial Efficiency Test
Purpose: Determines the filter’s ability to capture dust particles at the start of operation.
Method:
Uses A2 Coarse or A4 Fine dust.
Introduces either 20 g of dust or a mass equivalent to six times the rated airflow (m³/min).
Calculates efficiency based on dust captured by the test filter and absolute filter.
Application: Assesses initial filtration performance of new filters.
3. Full-Life Efficiency Test
Purpose: Measures filtration efficiency over the filter’s entire service life.
Method:
Dust is fed continuously until the filter reaches its final restriction (e.g., 2.5 kPa).
Cumulative filtration efficiency is calculated throughout the process.
Application: Simulates real-world filter lifespan and clogging behavior.
4. Incremental Efficiency Test
Purpose: Evaluates filter performance at multiple loading stages.
Method: Efficiency is measured at 10%, 25%, and 50% of the pressure drop difference between the initial and final restriction.
Application: Helps analyze how filtration efficiency evolves over time.
5. Dust Holding Capacity Test
Purpose: Determines total dust mass retained in the filter before reaching the final restriction.
Method: The filter is weighed before and after testing to calculate total dust capacity.
Application: Evaluates filter longevity and maintenance intervals.
在线联系供应商
Other supplier products
 |
large xenon lamp weathering and photoaging tester | Qinsun SUNTEST XXL+is a large xenon lamp weathering and photoaging tester that complies with various ISO, ASTM, and ICH industry standards. The exp... |
 |
Respirator Fit Tester | Application The PortaCount Respirator Fit Tester is suitable for fit and integrity testing across the following industries and products: (1) Mili... |
 |
Resistance to flame propagation tester | This equipment is designed and manufactured according to ECE R118 Annex 10. This model is intelligent, with PLC and touch screen intelligent contro... |
 |
Leather edge oil fatigue testing machine | Leather edge oil is made of polyvinyl chloride and other resins, used to coat leather, recycled leather, artificial/a colored semi-liquid material,... |
 |
Xenon lamp aging test chamber | TheXenon lamp aging test chamberis a photoaging tester for large-capacity textile testing. With additional sample light frame, temperature sensor a... |
Same products
 |
Air Intake Filter Test System | 卖方: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | 卖方: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | 卖方: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | 卖方: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
