High-efficiency Filter Test Bench| Testing Equipment
Introduction
The high-efficiency filter scanning test bench (referred to as the test bench) is designed and manufactured in accordance with the principles and requirements of the European standard EN1822-4 and in reference to relevant standards. Under the determined air volume conditions, test the efficiency and resistance of the filter and use the automatic scanning method to detect leaks in the filter. The location of the leak point can also be repeatedly detected manually. The foundation and core of the test bench is the particle counter. The aerosol medium used in the test bench is liquid aerosol (DEHS), with a particle size of ≥0.3μm(0.1μm can be selected according to customer requirements).
Reference Standard
EN 1822:2009 High efficiency air filters
GB/T 13554-2020 "High Efficiency Air Filters"
GBIT 6165-2021 "Test Methods for Performance of High Efficiency Air Filters - Efficiency and Resistance"
IEST-RP-CC007.2 ULPA filter test
1S High-efficiency air filter
Technical Parameters
| Upper computer | Adopt an advanced configuration software system |
| Lower computer | Siemens PLC |
| Counter | Five high-flow laser particle counters |
| Counter sampling flow | 28.3 L/min + 5% |
| Counter particle size range | 0.3μm, 0.5μm, 1.0μm, 3.0μm, 5.0μm, 10.0μm |
| Aerosol | DEHS |
| Diluter | 0.111111111 |
| Tested filter | Flat plate type high-efficiency filter |
| Filter size range | 300mmx300mm-1200mmx1200mm |
| Filter thickness range | 50mm-300mm |
| The efficiency range of the test | 85%-99.9995% |
| Air volume range | 500m³/h~3500m³/h |
| Resistance range | 0~1000pa |
| Measure the uniformity of wind speed at the cross-section | 10% or less |
| Scanning head speed | ≤5cm/s(adjustable) |
| Supply voltage | Three-phase four-wire :AC380V±5% Frequency: 50HZ |
| Power consumption | 10kW |
| Test bench dimensions | 8600x4000x2000mm(length x width x height)(estimated) |
| Gas source | (Oil-free, water-free):≥0.4MPa |
在线联系供应商
Other supplier products
 |
Micron Tester - lab instrument | Compliant Standards - GB 1103-2007: China's national standard for cotton micronaire value determination. - ASTM D1448: International standard for... |
 |
Martindale Abrasion Tester | Testing standards BS 3424/5690.IWTO 40-88.BS EN 388/530.IWSTM 112/196.ASTM 4966/4970 IS 12673.JIS L1096.SFS 4328.PR EN ISO 12947-1.PR EN ISO 12945... |
 |
Martindale Abrasion And Pilling Tester | Martindale Abrasion & Pilling Tester To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed ag... |
 |
Leather Vamp Flexing Extensibility Testing Machine | Introduction: Vamp Flexing Tester is used to determine the propensity for materials to crack or otherwise fail at flexing creases, but can also be... |
 |
Bubble Pressure Method Membrane Pore Size Analyzer | Instrument Standard Standard AbbreviationEnglish Translation GB/T 42269-2022 Pore Size of Separation Membranes - Gas Permeation Method... |
Same products
 |
Blanket Flammability Test Machine | 卖方: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | 卖方: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | 卖方: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | 卖方: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | 卖方: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
