High and low temperature universal creep testing machine
The High and Low Temperature Universal Creep Testing Machine is designed for long-term mechanical performance evaluation of non-metallic materials under controlled load and temperature conditions. The system integrates precise force control, displacement measurement, and environmental temperature regulation to perform creep, stress relaxation, tensile, compression, bending, shear, peeling, and tearing tests. It is suitable for laboratory research, material development, and quality inspection applications requiring accurate time-dependent deformation measurement.
Application
(1) Tensile creep and stress relaxation testing of plastic materials.
(2) Compressive creep testing of rigid foam plastics under specified load and temperature conditions.
(3) Tensile, compression, bending, and shear testing of non-metallic materials.
(4) Stripping and tearing performance evaluation of polymer-based materials.
(5) Long-term mechanical property research of plastics under high and low temperature environments.
(6) Quality control and performance verification for plastic and foam material manufacturers.
Standards
(1) GB/T 11546.1-2008 — Plastics — Determination of creep properties — Part 1: Tensile creep
(2) GB/T 15048-1994 — Test method for compressive creep of rigid cellular plastics
(3) GB/T 20672-2006 — Determination of compressive creep of rigid foam plastics under specified load and temperature conditions
(4) GB/T 1040.1-2006 — Plastics — Determination of tensile properties — Part 1: General principles
(5) GB/T 1041-1992 — Plastics — Determination of compressive properties
(6) GB/T 9341-2000 — Plastics — Determination of flexural properties
Features
(1) Integrated high and low temperature environmental testing capability.
(2) High-precision force measurement with wide effective measurement range.
(3) Stepless speed regulation for tensile and compression testing.
(4) Support for constant force and constant deformation control modes.
(5) High-resolution displacement and deformation measurement.
(6) Multiple test configurations including tensile, compression, and bending.
(7) Stable mechanical structure ensuring long-term creep test reliability.
Parameters
| Item | Specification |
|---|---|
| Maximum test force | 10 kN |
| Effective force measurement range | 0.4% – 100% FS |
| Force resolution | 1/300000 |
| Force measurement error | ±0.5% |
| Test speed range | 0.05 – 500 mm/min (stepless) |
| Speed accuracy | ±0.5% |
| Uniform force / deformation rate control range | 0.01% – 5% FS/s |
| Uniform rate control error | ±0.5% |
| Constant force / deformation control range | 0.5% – 100% FS |
| Constant control error | ≤10% FS: ±1% set value; >10% FS: ±0.1% set value |
| Beam displacement range | 0 – 999 mm |
| Displacement resolution | 0.001 mm |
| Displacement accuracy | ±0.5% |
| Beam deformation measurement range | 860 mm |
| Beam deformation accuracy | ±0.5% |
| Large deformation measurement range | 25 – 1000 mm |
| Large deformation accuracy | ±0.5% |
| Effective test width | 420 mm |
| Moving beam maximum travel | 1160 mm |
| Maximum wedge grip clamping force | 10 kN |
| Plate specimen clamping range | 0 – 8 mm |
| Rod specimen clamping range | φ6 – φ16 mm |
| Compression device diameter | φ70 mm |
| Bending support roller radius | R2.5 – R5.0 mm |
| Roller diameter | φ5 mm |
| Offset adjustment range | 120 mm |
| Overall dimensions (L×W×H) | 900 × 480 × 1810 mm |
在线联系供应商
Other supplier products
 |
Rubber wheel abrasive wear tester | Rubber wheel abrasive wear tester-According to ASTM G65-04 standard, under certain test conditions, the use of sliding friction in the form of engi... |
 |
Anti-drill tester (Friction method) | Application The tester is suitable for assessing material durability in security textiles, automotive composites, aerospace CFRP panels, and indus... |
 |
Needle Flame Tester - Test Equipment | Standard GB/T 5169.5: Electrical & Electronic Equipment – Needle Flame Test Method IEC 60695-11-5/IEC 60695-2-2: Fire Hazard Testing &n... |
 |
Shoe Lace To Eyelet Abrasion Test Machine | Standard GB3903.36.ISO 22774:2004 method 1: lace to lace abrasion; method 2: lace to standard eyelet abrasion; method 3: lace to eyelet (from f... |
 |
Leather Low-Temperature Flexing Tester | Leather Low-Temperature Flexing Tester is used to evaluate the cold resistance and flexing durability of leather and leather-coated materials, asse... |
Same products
 |
Air Intake Filter Test System | 卖方: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | 卖方: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | 卖方: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | 卖方: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
