MARK-II Slip Resistance Tester
The Slip Resistance Tester is designed to evaluate the static coefficient of friction between footwear soles and flooring surfaces. By applying a controlled normal load and gradually increasing horizontal force until the test sample slides, the tester provides a quantitative assessment of slip resistance. This information is essential for pedestrian safety evaluation and footwear material testing.
Application
(1)Slip resistance testing of footwear soles, including work boots, safety shoes, and casual footwear
(2)Evaluation of flooring surfaces such as tile, concrete, wood, vinyl, and anti-slip coatings
(3)Quality control in footwear manufacturing to ensure compliance with slip resistance standards
(4)Building inspection for public facilities, hospitals, schools, and industrial environments
(5)Laboratory testing for research and development of non-slip materials and coatings
(6)In-situ testing for slip hazard assessment in construction sites, commercial kitchens, and wet or oily surfaces
Standards
(1)ASTM F1677 — Standard Test Method for Pedestrian Walkway Slip Resistance
(2)EN 16165 — Slip Resistance of Pedestrian Surfaces
(3)ISO 13287 — Footwear – Test Method for Slip Resistance
(4)BS 7976 — Pendulum Test Method for Slip Resistance of Floors
(5)DIN 51130 — Testing of Floor Coverings – Ramp Test
Product Features
(1)Portable design for convenient on-site testing of floors and soles
(2)Rotating or tilting support frame to gradually apply horizontal thrust
(3)Weight system to apply fixed normal load on test sample
(4)Test fixture accommodating standard sample dimensions (76mm × 76mm)
(5)Sensor or gauge to measure horizontal force at the onset of slip
(6)Calculation of the static coefficient of friction based on measured forces
(7)Suitable for diverse flooring types and sole materials
(8)Simple operation with straightforward loading and tilting procedure
Technical Parameters
| Item | Specification |
|---|---|
| Sample Size | (76 ± 1) mm × (76 ± 1) mm |
| Normal Load | 10 lbs (≈4.54 kg) |
| Floor Requirement | Stable, horizontal surface |
| Tester Dimensions | 40 × 22 × 39 cm |
| Test Method | Static coefficient of friction measurement |
在线联系供应商
Other supplier products
 |
Vehicle Cabin Air Filter Tester | The Vehicle Cabin Air Filter Tester is a precision instrument designed to evaluate the filtration performance of passenger compartment air filters ... |
 |
Single wire and cable horizontal burner | Product Introduction: HT-DXSP touch screen control single wire and cable horizontal burner is suitable for determining the flame resistance of sin... |
 |
Elmendorf Tearing Strength Tester | Application The tester is widely used to assess tear strength and durability in: Textiles: fabrics, nonwovens, and composite textiles Plastics: ... |
 |
Digital Magic Tape Velcro Fatigue Tester | This machine is suitable for detecting the binding capacity of the hook and loop fastener ( Velcro tape) after the repeated stripping and fitting ... |
 |
Rubbing Color Fastness Tester | Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the fabric to dry and... |
Same products
 |
Blanket Flammability Test Machine | 卖方: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | 卖方: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | 卖方: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | 卖方: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | 卖方: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
