G506 Mask Automatic Filter Performance Tester

Application

G506 Mask Automatic Filter Performance Tester is used fortestingprofessional filter material and filtration efficiencyof a wide range of air filters including HEPA and ULPA filter, respirator, filter cartridge and protective clothing test. It also can use salt or oil mist to test filter media. Rapid acquisition of filter media performance evaluation parameters, and accurate evaluation of filter material quality, performance, life and so on. It is convenientto userforacademic research and product developmentof new filter materials, product quality control, material performance verification.

Standards

ASTM F2100:Standard Specification for Performance of Materials Used in Medical Face Masks

EN149:Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking

NIOSH-42 CFR84:NIOSH Guide to the Selection and Use of Particulate Respirators（或 42 CFR Part 84 - Approval of Respiratory Protective Devices）

Feature

Complies to more standards than any other filter tester

Salt and oil testing in one unit

Highly consistent test results

New user-interface and data recording options

Customizable fully automated testing sequences

Ergonomic design

Reduced cost of ownership with new serviceable photometers

Worldwide service and support

Parameters

Items	Parameter
Apllication	Load and quality control
Max Efficiency	99.999%
Aerosol Type	DOP/PAO/DEHS/Paraffi/Others Oil Aerosol、Salt
Aerosol Generation	Atomizing
CMD	0.2μm（Oil）or 0.75um(NaCl)
GSD	＜1.6（Oil）or <1.86(NaCl)
Flow Rate	15-100L/min
Resistance	0-150mm H2O(0-1470Pa)
Particle Detect	Scatter Photometer
Measurement Time	10 Sec.
Data Report	LCD，RS-232
Operation	Independent tewster、automatic production line
Standard compliant	US 42 CFR part 84.EN 143.JMOL，ISO 23328-1 ISO 16900-3
Power Supply	115VAC、60Hz，10A或230VAC，50Hz，5A
Compressor Air	80psig，7scfm（550kPa，198std.L/min）
Dimension	70cm x 70cm x 147cm（28in, x 28in.x 58in.）

Other supplier products

	Electronic single fiber strength meter	The Electronic Single Fiber Strength Meter is a precision instrument designed to measure the mechanical properties of single fibers, including brea...
	Schopper Abrasion Tester	Standards DIN 53863. Part 2: Abrasion test methods for textile fabrics (rotary abrasion test). GME Standard 60345 & GMW Standard 3283: Indust...
	Aerosol Foams Flammability Tester	Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 31.6 Flammabi...
	Micron Tester - lab instrument	Compliant Standards - GB 1103-2007: China's national standard for cotton micronaire value determination. - ASTM D1448: International standard for...
	Flexometer / Bally Leather Flexing Tester | Testing Equipment	Applicable Standards The tester adheres to global standards for leather physical testing, including: ISO 5402-1(Leather – Physical and mech...

供应产品

Same products

	Air Intake Filter Test System	卖方: Standard Groups	The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
	Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging	卖方: Standard International Group (HK) Limited	The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
	Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester	卖方: Standard International Group (HK) Limited	The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
	HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine	卖方: Standard International Group (HK) Limited	The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
	VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine	卖方: Standard International Group (HK) Limited	The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...