PVT Coolant Pulse Test Machine，High pressure coolant pulse test system
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The PVT Coolant Pulse Test Machine is designed for testing automotive cooling components, with a particular focus on rubber coolant hoses. It integrates linear vibration and eccentric rotation mechanisms, enabling automatic leak detection and leak testing. The machine is equipped with an automatic shutdown function for failed samples, ensuring safety and efficient testing workflows.
Application
You can use the PVT Coolant Pulse Test Machine to evaluate the durability, functionality, and leak resistance of automotive cooling system components. Typical applications include:
Testing rubber coolant hoses and tubes under dynamic pressure conditions.
Evaluating seals and connectors in cooling systems.
Simulating real-world vibration and thermal stress on components.
Integrating with automotive testing standards for component reliability.
Commonly used testing products with this machine:
Rubber coolant hoses
Plastic connectors and fittings
Cooling system assemblies
Automotive engine cooling components
Standards
The PVT Coolant Pulse Test Machine complies with a broad range of international automotive standards, including:
VW 78007 / TL 82048 / TL 81165 / TL 874 (4.4) – Volkswagen Group specifications for cooling system and interior material performance
TL 82002 / TL 52682 / TL 886 / TL 889 / TL 82086 – Volkswagen Group specifications for system component material performance and durability
PV 1712 (Ag 99-03) / GMW3155 – Fiat / General Motors engineering specifications for materials and component performance
PTL14052-A1203 / PTL14100-A0911 – Internal technical standards for component functionality and reliability
BMW LH 10356681 (10.5) / LH 10757369 (6.) / QV 17004 – BMW Group engineering specifications for material and component functionality and durability
BMW LH 7823444.6 / LH 10591317 / LH 10274837 – BMW Group engineering specifications for system component performance and functional validation
DIN 73411-2 [39] / Daimler M139 (2) / M177 (2) – Daimler engineering specifications / German industrial standards for component material and functional testing
Parameters
| Parameter | Details |
|---|---|
| Machine Dimensions | 4350 mm × 2520 mm × 2150 mm (W × H × D) |
| Test Chamber Internal Dimensions | 1800 × 1000 × 1000 mm (W × H × D) |
| Rated Power | 60 kW |
| Test Medium | Glycol / Water |
| Pressure Range | 0 … 5 bar |
| Medium Flow Control | Up to approx. 100 l/min |
| Linear Motion | ±25 mm at 1 Hz ±12 mm at 5 Hz ±6 mm at 10 Hz ±2 mm at 20 Hz |
| Test Medium Temperature Range | -40°C … +150°C |
| Environment Temperature Control Range | -40°C … +150°C |
| Test Channels | 8 |
Features
Combines linear and eccentric motion mechanisms for pressure pulse testing.
Operates in a pressure range of 0.1 … 5 bar.
Heats the test chamber by monitoring maximum surface temperature limits.
Automatic leak detection and leak testing with shutdown of failed samples.
Integrated recirculation pump prevents coolant leakage.
Windows / LabView-based control unit for data acquisition and monitoring.
Accessories
Test hoses and fittings
Data acquisition sensors
Leak detection probes
Temperature control modules
Linear and eccentric motion actuators
Test Procedures
Install the component to be tested in the test chamber.
Connect the test medium (glycol/water) and set the desired flow rate.
Configure test parameters including pressure range, linear/eccentric motion frequency, and temperature range.
Start the test via the Windows/LabView control unit.
Monitor real-time data for pressure, temperature, and leak detection.
The machine will automatically stop and alert you if a sample fails.
Record and export test results for analysis.
Maintenance Information
Regularly check and clean the recirculation pump and medium lines to prevent blockages.
Inspect motion actuators for wear and lubricate as recommended.
Calibrate pressure and temperature sensors periodically to ensure accurate testing.
Clean the test chamber and remove any residue from previous tests.
Update the control software and verify data acquisition integrity.
在线联系供应商
Other supplier products
 |
ASTM G99 Pin-on-Disc Tribometer Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Pin-on-Disc Friction and Wear Tester is designed for evaluating the frict... |
 |
Air filter System（ISO 16890/EN 779），air filter performance testing apparatus | Whats/App: +86 156 1874 6768 Web: standard-groups.com Filter test system for general air filters according to ISO 16890. EN 779. ASHRAE 52.2 The... |
 |
Sliding Bearing Fatigue Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The sliding bearing fatigue testing machine is an important testing device, mainly used to ... |
 |
Rubber Mooney Viscosity meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Test principle: The Mooney viscometer is used to measure the viscosity of rubber under spe... |
 |
Industrial Cleanable Filter Media Test System Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Parameters ParameterUnitValue Te... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
