Filter Integrity Test System
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
Application
(1) Hydrophobic filter integrity testing (water intrusion test).
(2) Hydrophilic liquid filter integrity testing (forward flow and bubble point tests).
(3) Pre-use validation for single-use systems and small-scale process equipment.
(4) Liquid sterilizing filtration systems in pharmaceutical, biotechnology, and life sciences industries.
(5) Gas sterilizing filter integrity verification in the pharmaceutical industry.
(6) Laboratory environments under GMP and 21 CFR Part 11 control.
(7) Verification of various process liquid or gas filters, including laboratory and industrial production processes.
(8) Supports multiple membrane types, including hydrophobic, hydrophilic, and composite membranes.
Testing Standards
ASTM F838 – Membrane bubble point method
ASTM D5199 – Gas and liquid filtration membrane performance testing
ISO 2548 series – Pressure decay and diffusive flow methods
GMP/GDP Filter Validation Guidelines
FDA 21 CFR Part 11 – Data integrity compliance
Product Specifications
| Parameter | Technical Specifications |
|---|---|
| System Size | 1189 × 575 × 856 mm |
| System Weight | Approx. 120 kg (empty water tank) |
| Water Tank Capacity | 18 L (removable, manual/automatic filling) |
| Forward Flow Test Accuracy | ±3% or ±0.05 mL/min (whichever is larger) |
| Water Intrusion Test Accuracy | ±3% or ±0.02 mL/min (whichever is larger) |
| Bubble Point Test Accuracy | ±3% |
| Power Supply | 100–240 VAC, 50/60 Hz, typical power 150 W |
| Compressed Air Pressure | 4500–8000 mbar (58–116 psi) |
| Test Flow Range | FF: 0.1–1000 mL/min; WIT: 0.02–50 mL/min; BP: 400–6500 mbar |
| Test Resolution | FF: 0.1 mL/min ( |
| Touch Screen | 26.4 cm diagonal, 1024 × 768 pixels, backlit, adjustable contrast |
| Protection Level | IP54 (splash-proof) |
| Environmental Conditions | Operating temperature: 5–50℃; Storage temperature: -20–70℃; Relative humidity: 95% RH (non-condensing) |
在线联系供应商
Other supplier products
 |
Cantilever Fabric Stiffness Tester - Test Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Standard ZB WO4003. GB/T18318. ASTM D 1388. IS09073-7. BS EN22313 Application F... |
 |
Load-Controlled Friction and Wear Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Load-Controlled Friction and Wear Testing Machine is designed for comprehensiv... |
 |
Solid Split-Type Weighted Dummy | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Solid Split-Type Weighted Dummies are widely used by automotive manufacturers both... |
 |
Limiting Oxygen Index Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Limiting Oxygen Index Tester The oxygen index of th... |
 |
Test system for large filter elements | Standards ISO 29463-5 Technical parameters Measuring range (total penetration) Up to 0.0005 % Measurement range (size) 0.02 –... |
Same products
 |
Damp Freeze and Thermal Cycling Tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Freeze and Thermal ... |
 |
Alternative to BBA steady state solar simulator tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The BBA Steady-State Solar S... |
 |
Alternative to PV Hail Impact Tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Hail Impact Test Machine... |
 |
Solar Panel Insulation Resistance Test Chamber | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is applicable in ... |
 |
90-Degree Peel Tester for PV Backsheets | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for e... |
