Flame Spread Index Tester，ASTM E648 Flame propagation of carpet materials
The Flame Spread Index Tester is designed to evaluate the flame propagation characteristics of wall and ceiling lining materials. You can measure the material’s flame spread index (FSI) by exposing samples to a controlled tubular burner with a heat output of 530 J/s and monitoring the flame development over time. This tester allows you to assess fire performance accurately according to international and national standards, providing critical data for building safety, material development, and regulatory compliance.
Application
You can apply this tester in the following scenarios:
Building materials evaluation: Assess the flame spread index of wall and ceiling lining materials.
Plastic material testing: Determine vertical and horizontal flame propagation for polymer materials.
Fire safety compliance: Evaluate materials for civil, railway, and aerospace interior standards.
Quality control: Monitor production materials to ensure consistent fire performance.
Compatible test components: Tubular burner, quartz heaters, T-shaped burner, sample holders, thermocouples, and integrated computer data acquisition system.
Standards
This tester conforms to the following international and national standards:
GB/T 8624‑2012 — Classification of burning behavior of building materials and products (Flame spread index basis)
GB/T 2406.2‑2009 — Plastics combustion test, vertical burning method
GB/T 2408‑2008 — Plastics combustion test, horizontal burning method
GB/T 27904‑2011 — Flame spread test for interior decoration materials
GB/T 16172‑2007 — Determination of heat release rate and total heat release (Cone calorimeter method)
ISO 5658‑2 — Determination of flame spread index, Part 2: Small flame spread test
ISO/TR 9705‑2 — Room corner flame spread test, Part 2: Material performance evaluation
ISO 5660‑2 — Heat release rate, smoke production, and mass loss, Part 2: Flame spread method
ISO 5660‑4 — Heat release and smoke testing for automotive interior materials
ASTM E162 — Surface flammability: smoke density and flame spread
ASTM E648 — Flame propagation of carpet materials
UL 94 — Plastic material flammability: vertical and horizontal burning tests
BS 6853:1999 — Railway vehicle material flame spread, smoke density, and toxicity evaluation
BS 476‑6:1989 + A1:2009 — Fire performance test of building materials, Part 6: Small flame spread method
Parameters
| Parameter | Specification |
|---|---|
| Dimensions | 950 × 600 × 870 mm |
| Weight | 105.5 kg |
| Heating Devices | 2 × 1000 W quartz heaters providing thermal radiation |
| Burner Type | T-shaped tubular burner |
| Sample Holders | 3 types, stainless steel wrapped |
| Thermocouples | Continuously measure temperature difference between chimney and room |
| Power Output Control | Automatic adjustment according to test timeline |
| Data Acquisition | Computer-based, report generation |
Features
Durable stainless steel frame: Ensures structural stability and long-term reliability.
Silicate combustion chamber: Provides uniform and controlled testing environment.
Multiple sample holders: Accommodate different test configurations securely.
Quartz heaters: Deliver consistent thermal radiation to samples.
T-shaped burner: Provides precise direct flame for small flame spread tests.
Continuous temperature monitoring: Thermocouples record chimney versus room temperature.
Automatic power control: Heater output adjusts automatically according to test timeline.
Integrated data acquisition: Computer automatically processes data and generates test reports.
Accessories
Quartz radiation heaters (2 × 1000 W)
T-shaped tubular burner
Stainless steel sample holders (3 types)
Silicate combustion chamber
Thermocouples and mounting accessories
Integrated computer and printer with data acquisition system
Test Procedures
Install the sample in the combustion chamber using the appropriate sample holder.
Connect the G112 test gas supply.
Start the quartz heaters and T-shaped burner, providing thermal radiation and flame exposure.
Adjust heater power automatically according to the test schedule:
First 2 min 45 s: initial burner exposure at 530 J/s
At 2:45 min: increase total heater power to 1800 W
At 5 min: reduce power to 1500 W and maintain until test end
Record flame propagation, temperature, and FSI using the thermocouple and data acquisition system.
Total test duration is 20 minutes. Upon completion, safely remove the sample and review results.
Maintenance Information
Regularly clean the combustion chamber and burners to ensure consistent heat flux.
Calibrate thermocouples and power output control systems periodically.
Inspect sample holders and chamber integrity before each test.
Ensure gas supply is stable and leak-free.
Maintain ambient temperature between 10–35°C for consistent testing conditions.
在线联系供应商
Other supplier products
 |
Toilet Corrosion Test Chamber (HCl and Ammonia)，acid exposure cabinet for bathroom ware | The Toilet Corrosion Test Chamber (HCl and Ammonia) is used to evaluate the rust resistance of toilet products to detergents and urine, meeting the... |
 |
Luggage rod reciprocating fatigue testing machine | Luggage rod reciprocating testing machine for luggage rod reciprocating fatigue test. In the test, the specimen will be stretched to test the gap g... |
 |
Abrasive Wear Testing Machine | Abrasive wear testing machines are mainly used to evaluate the surface wear performance of materials. They conduct abrasive wear tests on materials... |
 |
Metal ring friction and wear testing machine | Evaluate the wear resistance of the material: By simulating the friction process, real-time monitoring of friction, temperature, wear and other pa... |
 |
Tensile and Shear Tester | Obtainable data includes tensile/shear rigidity, tensile energy, elongation rates, and recoverability for such targets as cloth, paper, non-woven f... |
Same products
 |
Damp Freeze and Thermal Cycling Tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Freeze and Thermal ... |
 |
Alternative to BBA steady state solar simulator tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The BBA Steady-State Solar S... |
 |
Alternative to PV Hail Impact Tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Hail Impact Test Machine... |
 |
Solar Panel Insulation Resistance Test Chamber | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is applicable in ... |
 |
90-Degree Peel Tester for PV Backsheets | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for e... |
