Vacuum Cleaner Filtration Test System，vacuum cleaner particle capture efficiency tester
Vacuum Cleaner Filters for emission characterisation of vacuum cleaners (EN 60312)
For emission tests the suction air is prepared with a dust concentration of 550 mg/m³ and passed directly into the hose of the vac.
For dust retaining tests the suction air is prepared with a dust concentration of 100 mg/m³ in the inlet channel (mixingtube) described in the standard.
Applications
Determination ofparticleemission of the vacuum cleaner into the exhaust air
Determination of the dust retaining capacity of the vacuum cleaner
Standard
The Vacuum Cleaner Filters is designed for tests on vacuum cleaners (vac) for household or small business use according to the standard EN 60312.
GB/T 38043-2019 Commercial Vacuum Cleaner Performance Test Methods
GB/T 4214.2-2020 Noise Measurement for Household Appliances – Vacuum Cleaner Requirements
EN 60312 Vacuum Cleaner Performance Test Standard
Commission Delegated Regulation (EU) No. 665/2013 Energy Label and Dust Re-Emission Requirements
Features
Manual control for service, calibration procedures and user defined tests
Automatic test procedures in accordance with standard EN 60312
Emission test with determination of the average result and determination of a confidence limit
Filtration efficiencytest with determination of a confidence limit
Dust-reemission tests according to Commission Delegated Regulation (EU) No. 665 / 2013; known as ‘Energy Label for Vacuum Cleaners’
Technical data
| Parameter title | Unit | Value |
|---|---|---|
| test flow rate | m³/h | 18 ... 200 |
| power supply | - | 230 V AC; 50-60 Hz; 16 A |
| operating medium, gas/air | - | dry,particle-free compressed air |
| operating medium, gas/air - compressed air supply | bar | min. 5 (min. 5 m³/h) |
| dimensions (w × h × d) | mm | 2600 ×2500 × 850 |
| weight | kg | 350 |
Accessories
control Software VCTWin for Vacuum Cleaner Test Rig VCT 121
Test Procedures
(1) Place the vacuum cleaner in the sealed test hood and ensure airtight connection.
(2) Select the test type: emission test or dust retention test.
(3) Start the dust feeder and set the required dust concentration.
(4) Launch automatic or manual testing program and collect particle concentration and airflow data.
(5) Calibrate sensors (airflow, pressure, environmental conditions) to ensure accuracy.
(6) After the test, export data and generate statistical analysis and test reports.
在线联系供应商
Other supplier products
 |
Safety Helmets Impact and Penetration Resistance Tester | The Safety Helmets Impact and Penetration Resistance Tester is a dual-function testing system designed to evaluate helmet safety under both impact ... |
 |
Micro Controll Four-ball Friction Tester | The microcomputer-controlled four-ball friction testing machine uses a sliding friction method under point contact pressure conditions at the extre... |
 |
Intervertebral Fusion Cages Torsion Fatigue Tester | Standard YY/T 0959-2014 (China): Specifies torsional fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency... |
 |
Intramedullary Nails Static Four-point Bending Tester | Standard YY/T 0591 (China): Standard for static four-point bending tests of lockable intramedullary nails. ASTM F1264 (International): Specificat... |
 |
Wire Torsion and Winding Tester | Product Introduction Metal wire twisting and winding machine is widely used in aerospace, metal material processing, tire manufacturing and other ... |
Same products
 |
Dynamic Shear Rheometer | 卖方: Standard Groups | Dynamic Shear Rheometers are configured to meet the demands of everyday quality control testing o... |
 |
Noxious Gas Test Chamber | 卖方: Standard Groups | Noxious gas tеst chambеrs play a crucial role in thе industrial sector by еnsuring thе longеvity ... |
 |
Chest Drainage Tester | 卖方: Standard Groups | The Chest Drainage Tester is a precision instrument designed to evaluate the performance of dispo... |
 |
Plastic Smoke Density Tester | 卖方: Standard Groups | You can use the F313 Plastic Smoke Density Tester in the following areas: Plastics industry: Eva... |
 |
Washing Fastness testing machine | 卖方: Standard Groups | G228B washing fastness tester is used for washing, dry-clean color fastness testing. Electric tou... |
