Leakage Test System，ISO 20485 sealed component leak tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Test System for testing tightness and leackage for a high diversity of components and devices. With Leak Test Systems of series it is possible to test tightness against over and low-pressure of components of different dimensions and shapes. The leak rate is determined depending on pressure.
The test rig is working at test air temperatures from -40°C up to 120°C. A heat exchanger protects the measurement instrumentation against damages because of too low or high temperatures during low pressure operation. For external connection the test rig has a test air adapter, a pressure measurement port as well as a temperature sensor which have to be connected with the test sample. All connecting lines are 2 m long so that the sample can be in a climatic chamber during the test.
Applications
Tightness and leak testing of technical components and devices;
Sealing performance testing of automotive and engine system components;
Leakage detection of pipelines, valves, fittings, and pressure vessel assemblies;
Integrity verification of enclosure sealing for electronic, electrical, and electromechanical equipment;
Overpressure and vacuum testing of aerospace and rail transit components;
Sealing performance evaluation of medical devices and laboratory equipment;
Sealing tests under high- and low-temperature conditions in environmental test chambers;
Verification of sealing structure designs during new product development;
Sealing quality control in production lines and final inspection processes.
Standards
GB/T 4208 Degrees of Protection Provided by Enclosures (IP Code)
GB/T 10125 Corrosion Tests in Artificial Atmospheres – Salt Spray Tests
GB/T 15173 Sealing Test Methods for Electrical Equipment
GB/T 2423 (Series) Environmental Testing for Electric and Electronic Products
QC/T 413 Sealing Test Methods for Automotive Parts
JB/T 9092 Airtightness Test Methods for Industrial Products
ISO 20485 Non-destructive Testing – Leak Testing – General Methods
ASTM E283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
Technical data
| Parameter | Unit | Value |
|---|---|---|
| Test flow rate | L/min | 0.005 … 300 (during operation) |
| Test pressure | kPa | – (0.1 … 90); + (0.1 … 500) |
| Operating medium (gas/air) | – | Dry, particle-free compressed air |
| Compressed air supply | bar | max. 8 (max. 600 L/min) |
| Power supply | – | 230 VAC |
| Environmental condition, temperature | °C | -40 … 120 |
| Power consumption | W | approx. 500 |
| System dimensions (W × H × D) | mm | 2000 × 1100 × 900 |
| Weight | kg | approx. 280 |
Features
Test pressure is measured directly at test sample
Tests with over and low-pressure possible (pressure and suction mode)
Wide temperature range of applicable test air
By means of cascading of several laminar flow elements wide volume flow range
Compact design
Mobile – easy to move by lockable weels
Easy handling supported by computer-controlled test procedure
Accessories
(1) Test air adapter for external sample connection
(2) Pressure measurement port
(3) Temperature sensor for test air monitoring
(4) Connecting lines
(5) Computer-controlled test and data acquisition software
Test Procedures
Connect the test sample to the test air adapter, pressure port, and temperature sensor.
Place the test sample in ambient conditions or inside a climatic chamber if required.
Select overpressure or low-pressure test mode according to the test requirement.
Apply compressed air or vacuum to establish a stable pressure condition inside the sample.
Measure pressure, volume flow, and gas temperature continuously during the test.
Calculate the leak rate automatically based on flow behavior and pressure differences.
Record and evaluate the test results using the computer-controlled system.
Maintenance Information
Regularly inspect laminar flow elements to ensure accurate flow measurement.
Keep compressed air clean and dry to prevent contamination of measurement components.
Verify pressure and temperature sensors periodically for calibration accuracy.
Check seals, hoses, and connectors for wear or leakage before each test series.
Ensure proper functioning of the heat exchanger when operating at extreme temperatures.
在线联系供应商
Other supplier products
 |
ISO 22612 microbial barrier tester for protective clothing | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Y/T 0471.5-2017 is a newly updated standard, which specifies the experimental... |
 |
Air erosion test equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Air Jet Erosion Tester is used to assess erosion behavior by exposing mate... |
 |
Oxidizing Solids Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Conforms to UN Recommendations on the Transport of Dangerous Goods - M... |
 |
Ignition Distance Measurer for Spray Aerosols | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Conforms to UN Recommendations on the Transportation of Dangerous Good... |
 |
Micro Controll Constant-Speed Friction Plate Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com A friction and wear testing machine is a device composed of a test force loading system, a ... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
