Kinematic Viscosity Tester-Petroleum Products Test Equipment，ISO 3104 fuel and petroleum products viscosity tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Petroleum Products Kinematic Viscosity Tester is a specialized instrument used to measure the kinematic viscosity of liquid petroleum products (Newtonian fluids). You determine viscosity by allowing the liquid to flow through calibrated glass capillaries at a constant temperature, measuring the flow time, and applying the capillary constant to calculate kinematic viscosity. You can also derive dynamic viscosity by combining with the liquid density. This tester is widely applied in petroleum, petrochemical, oilfield, transportation, research, and metrology sectors for quality control and scientific studies.
Application
You can use this instrument in the following scenarios:
(1) Testing petroleum and petroleum-based products.
(2) Measuring physical properties of chemical liquids.
(3) Oilfield product testing and R&D.
(4) Monitoring fuel and lubricants in railways and transportation systems.
(5) Laboratory and university research on liquid viscosity.
(6) Standardized measurements in metrology and calibration departments.
Standards
You can operate this tester in compliance with the following standards:
(1) GB/T 265-2017 – Petroleum Products: Determination of Kinematic Viscosity.
(2) ASTM D445-2020 – Kinematic Viscosity of Transparent and Opaque Liquids (for dynamic viscosity calculation).
(3) ISO 3104:2021 – Petroleum Products: Determination of Kinematic Viscosity.
(4) IP 71:2020 – Petroleum Products: Determination of Kinematic Viscosity.
Parameters
| Parameter | Unit | Value |
|---|---|---|
| Applicable Fluid | – | Newtonian liquids |
| Heating Method | – | Water bath with constant temperature electric heating |
| Test Capillaries | pcs | 5 (simultaneous testing) |
| Heating Medium | – | Clean water |
| Temperature Range | ℃ | Room temperature – 100 |
| Heating Power | W | 1700 |
| Temperature Control | – | Automatic, ±0.1℃ |
| Bath Dimensions | mm | Φ300 × 300 |
| Overall Dimensions | mm | 540 × 370 × 640 |
Features
High accuracy and repeatability; simple and user-friendly operation.
Efficient insulation material ensures superior temperature stability compared to traditional dual-bath designs.
Powerful stirring motor ensures uniform temperature distribution, improving measurement consistency.
High-precision automatic temperature control with ±0.1℃ accuracy.
Standard bath volume provides stable thermal conditions for accurate testing.
Five simultaneous testing channels increase experimental efficiency.
Specialized viscosity meter clamp ensures safe, reliable handling of capillaries.
Accessories
(1) Capillary Viscometers: Calibrated for measuring flow time.
(2) Clamps: Specialized fixtures for secure holding of viscometers.
(3) Thermostatic Bath: With stirring function to maintain uniform temperature.
(4) Heating Control Instrument: Automatic temperature control.
(5) Stirring Motor: Ensures even temperature distribution in the bath.
(6) Power Cable: Standard 220 V, 50 Hz.
(7) Clean Water: Used as the heating medium.
(8) Temperature Sensor: Real-time monitoring of bath temperature.
Test Procedures
Fill the thermostatic bath with clean water and start the stirring motor.
Set the target temperature and wait until the system stabilizes.
Place the capillary viscometer into the clamp and inject the sample liquid.
Start timing as the liquid flows through the capillary.
Record the flow time and calculate the kinematic viscosity using the capillary constant.
Calculate dynamic viscosity by combining the measured kinematic viscosity with the liquid density.
After testing, clean the viscometers and clamps to maintain instrument hygiene.
Maintenance Information
Regularly inspect capillaries for cracks or residue.
Ensure the bath water is clean and replenished as needed.
Verify the stirring motor and heating system are functioning correctly.
Maintain the clamps and viscometer holders for secure operation.
Record all measurements and maintenance actions for traceability.
在线联系供应商
Other supplier products
 |
Spring torsion fatigue tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Spring torsional fatigue testing machine (horizontal) is a new type ... |
 |
Universal Finger Abrasion Tester Manufacturer Factory Direct Sale | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features 1. High-fidelity testing that realistically simulates chemical/mech... |
 |
walk-in constant temperature and humidity test chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Walk-in Constant Temperature and Humidity Test Chamber is suitable for co... |
 |
Autocatalytic Decomposition Temperature Tester with Thermal Insulation，autocatalytic decomposition temperature measurement | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Autocatalytic Decomposition Temperature Tester with Thermal Insulation (Adiabatic SADT ... |
 |
Combustible Dust Ignition Temperature Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications 1. Chemical/Pharmaceutical Industry: Testing the MIT (Mixed Explosion-Proof) ... |
Same products
 |
Laser Chuck | 卖方: 00000 | Laser Chuck Introduce foreign advanced technology and management concept, High precision pro... |
 |
Power Pallet Jack For Sale | 卖方: Jinan Hulk Machinery Co., Ltd | Power Pallet Jack For Sale Electric Pallet Truck For Sale As a supplier of power pallet jac... |
 |
Multi Directional Forklift For Sale | 卖方: Jinan Hulk Machinery Co., Ltd | Multi Directional Forklift For Sale Multi Directional Forklift For Sale As a supplier of mu... |
 |
Narrow Aisle Forklift For Sale | 卖方: Jinan Hulk Machinery Co., Ltd | Narrow Aisle Forklift For Sale Narrow Aisle Forklift For Sale As a supplier of , we provide... |
 |
Electric Order Picker Supplier | 卖方: Jinan Hulk Machinery Co., Ltd | Electric Order Picker Supplier Electric Order Picker Supplier As an supplier, we offer a co... |
