custom wyzenbeek/Oscillatory Abrasion Tester

Application

1. Automotive Industry

Testing the abrasion resistance of seat fabrics and steering wheel leather to evaluate durability during long-term use.

Simulating the friction between seats and passenger clothing to optimize material selection and reduce wear rate.

Testing the abrasion resistance of aircraft interior materials under extreme conditions such as high altitude and low temperature.

2. Furniture Industry

Testing the abrasion resistance of textiles used in sofas, chairs, and other furniture to ensure product lifespan meets standards.

Comparing the abrasion resistance of different fabric structures to guide product improvement.

3. Materials Research and Development

Providing abrasion resistance data support for new fiber materials and coating processes.

Comparing the impact of different treatment processes (such as waterproofing and fire resistance) on abrasion resistance.

4. Third-Party Testing

Serving as a third-party testing device to verify whether materials meet international standards (such as ASTM D4157. BS EN ISO 12402-7. FTMS 191A 5304. etc.).

5. Electronics Industry

Verifying the friction resistance lifespan of mobile screen protectors, touch panels, and keyboard coatings.

6. Packaging Industry

Testing the abrasion resistance of labels and packaging films to prevent information blurring, coating peeling, or damage due to friction during transportation or storage.

Parameters

Technical Parameter	Specification
1. Design Style	Modern ergonomic design
2. Suction Device	Connected to the auxiliary vacuum cleaner
3. Transmission Feature	Sealed transmission (ensures quiet operation)
4. Test Position	4 heads
5. Friction Table	Curve surface-R100mm, length-400mm
6. Swing Radian	76±2mm
7. Friction Rate	90±1/min (double friction)
8. Tension Adjustment Weight	340g (tension adjustment range: 8.9N-22.25N)
9. Load Adjustment Weight	150g (load adjustment range: 8.9N-17.8N)
10. Sample Tension	17.8N (adjustable)
11. Sample Load	13.4N (adjustable)
12. Sponge Rubber Pressure Pad	50×50mm (±1mm)
13. Instrument Material	Stainless (steel)
14. Surface Finishing	Painting
15. Sample Dimension	245×73mm
16. Product Dimension (L×W×H)	50×50×60

Accessoriess

Standard accessories:Abrasion media (e.g., standard abrasive paper/cloth), sample fixing clamps, standard weights, digital counter, power cord, user manual, certificate of conformity, and calibration tools (for some models).

Optional accessories: Additional abrasion media, specialized abrasive heads, temperature/humidity control modules, pre-tension adjustment fixtures, and result evaluation auxiliary tools (e.g., light boxes).

Test Procedures

1. Sample Preparation

Cut test specimens according to the standard (commonly 120mm×20mm, 140mm×50mm, etc.), and condition them for 24 hours (23±2℃, 50±5% RH). Elastic leather samples should be stretched by 10% (or to the maximum stable elongation).

2. Equipment and Medium Pre-treatment

Clean the platform and calibrate the pressure (500g for dry friction / 1000g for wet friction); for wet friction, treat the wool felt/cotton cloth with boiling water and squeeze out excess water until it weighs approximately 1g (or has a water absorption rate of 100±5%).

3. Parameter Setting and Testing

Select dry/wet mode, set the number of friction cycles (5-500 cycles, e.g., ISO 11640 specifies 50 cycles for dry rubbing and 10 cycles for wet rubbing), and speed (30-60 cycles/minute); fix the sample and friction medium, and start the instrument until the preset number of cycles is reached.

4. Result Evaluation

Under D65 light source, use a gray scale to evaluate the staining grade of the friction medium (grades 1-5) and the discoloration grade of the leather. Record whether there is pilling/cracking on the surface. Take the lower value from parallel tests.

Other supplier products

	Friction Tester for Fabrics	Instrument Description This fabric friction tester can measure the static and kinetic friction coefficients of non - woven fabrics. It can be used...
	Infusion Pump Flow Rate Tester	The Infusion Pump Flow Rate Tester is specifically designed for testing the flow rate of sodium chloride solution in infusion sets. It is suitable ...
	Wire Torsion Tester	Applicable standards: GB/T 239.1-2012 "Metal materials wire Part I unidirectional torsion test method" GB/T 239.2-2012 "Metal materials wire Part...
	Electric rolling wheel peeling testing machine	Introduction Electronic pressure roller testing machine (automatic pressure roller machine) specializing in intaglio printing process for the prod...
	Dental Implants Fatigue Tester	Standard ISO 14801:2016: Specifies dynamic fatigue testing protocols for endosseous dental implants, including load ratios, frequency, and failure...

供应产品

Same products

	Steam jet durability testing machine	卖方: Standard International Group (HK) Limited	The Steam Jet Test Chamber is designed to evaluate the durability and performance of materials an...
	Seat Bumping and Creep Test Bench	卖方: Standard International Group (HK) Limited	Application Applications of the Single Station Jounce Tester include, but are not limited to, th...
	high precision impact testing machine	卖方: Standard International Group (HK) Limited	The Impact Testing Machine is a precision instrument designed for material testing in the aerospa...
	Laboratory expansion tank pressure tester	卖方: Standard International Group (HK) Limited	The Expansion Tank Static Pressure Test Machine is a specialized system designed to evaluate the ...
	Automotive Windshield Washer Nozzle Fatigue Testing Machine	卖方: Standard International Group (HK) Limited	The Windshield Washer Nozzle Fatigue Test Machine is designed to evaluate the durability and perf...