ASTM D2843 smoke density tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
You can use the F313 Plastic Smoke Density Tester in the following areas:
Plastics industry: Evaluate smoke generation of various plastic materials, especially for fire safety assessment and material selection.
Construction industry: Test smoke density of building materials, including coatings and plastics used indoors.
Automotive industry: Assess smoke generation of interior materials to meet fire safety standards.
Aerospace industry: Conduct fire safety evaluations of aircraft materials and components.
Research institutions: Simulate fire scenarios for fire prevention and firefighting research.
Fire safety product development: Support testing and certification of fire-resistant materials.
Public safety applications: Evaluate safety materials used in airports, train stations, shopping malls, and other public spaces.
Standards
The instrument conforms to the following national and international standards:
(1) GB/T 8323.2-2008 – Plastics – Smoke generation – Part 2: Determination of smoke density using the single-chamber method
(2) ISO 5659.2-2006 – Plastics – Smoke generation – Part 2: Determination of optical density
(3) ASTM E662-2014 – Standard test method for specific optical density of smoke generated by solid materials
(4) BS 6853:1999 – Railway applications – Smoke generation from passenger carriage materials
(5) NFPA 262 – Standard test method for flame and smoke spread
(6) UL 94 – Standard for flammability of plastic materials
(7) ISO 1210 – Determination of thermal stability and flammability of plastics
Parameters
| Parameter | Specification |
|---|---|
| Measurement range | 0.0001–100% smoke density; 0–924 (six automatic ranges) |
| Operating voltage | 200–240 V, 50 Hz |
| Environmental conditions | Room temperature – 40°C, relative humidity ≤85% |
| Heat flux | 50 kW/m² |
| Light source | 6.5 V incandescent lamp, wavelength 400–750 nm |
| Detector | Silicon photodiode, 0–100% transmittance, 0.001% precision |
| Fuel type | Propane ≥95% purity |
| Burner | Igniter and nozzle combination, 10 mm from sample |
| Smoke measurement system | Digital display of optical density |
| Chamber design | Fully open doors for easy loading, cleaning, and side-mounted controller |
| Gas sampling port | Optional, for toxicity testing |
| Chamber coating | Chemically resistant and easy to clean |
Accessories
(1) Propane cylinder (≥95% purity, user-supplied)
(2) Smoke sampling tube (1 set)
(3) Silicon photodiode (1)
(4) Light source lamp, 6.5 V (1)
(5) Filter set (1)
(6) Protective door (1)
Test Principles
The F313 Plastic Smoke Density Tester measures smoke optical density by placing a burning plastic sample in a controlled environment. A light source passes through the smoke, and a silicon photodiode detects the transmitted light. The system calculates the specific optical density of the smoke. Maximum optical density is measured to evaluate the smoke-generating characteristics of the plastic material. All measurements strictly comply with GB, ISO, and ASTM standards.
在线联系供应商
Other supplier products
 |
Automatic Scratch Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automatic Scratch Tester is designed for evaluating the hardness and friction performan... |
 |
Environmental Stress Cracking Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D1693: Exclusively designed for bending beam and constant load tests on poly... |
 |
Waterproof socks testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Waterproof Socks Testing Machine is designed to evaluate the water resistance and water... |
 |
Spring torsion fatigue testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spring Torsion Fatigue Testing Machine (horizontal type) is an advanced automatic torsi... |
 |
Impact strength tester for car seat launching headrest | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Impact Strength Tester for Car Seat Launching Headrest is a specialized testing system ... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
