.

Rotary Reciprocating Friction Wear Testing Machine

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Applications

You can use this tester to:

Evaluate the tribological performance of material surfaces and coatings

Test wear resistance and friction coefficients of friction pairs, including metals, polymers, and ceramics

Monitor friction force, temperature, and other parameters in real time

Support material research, quality control, and production testing

Standards

ASTM G99 – Standard Test Method for Wear Testing

ASTM G133 – High-Temperature Friction and Wear Test Method

ISO 20808 – Solid Material Friction and Wear Test

GB/T 3147 – Determination of Friction Material Wear Performance

Technical Specifications

ParameterRange / Specification
Maximum Test Force 1000 N
Maximum Speed 2000 rpm
Maximum Frequency 200 Hz
Maximum Reciprocating Friction Force 100 N
Maximum Rotational Torque 4.7 Nm
Reciprocating Stroke Range ±6 mm
Reciprocating Friction Modes Ball-on-disk, Pin-on-disk, Cylinder-on-disk
Rotational Friction Modes Ball-on-disk, Pin-on-disk, End-face
Temperature Range Room temperature – 600℃
Notes Optional micro-force module, ring-block module available

Accessories

NameDescription
Micro-Force Module Enables low-load tests with enhanced precision
Ring-Block Module Provides additional friction pair configurations
High-Temperature Furnace For friction testing at elevated temperatures
Temperature Sensors Monitor friction pair temperature during high-temperature testing
Friction Pair Materials Ball-on-disk, pin-on-disk, cylinder-on-disk, end-face, etc.

Testing Principle

This tester evaluates the tribological behavior of materials under rotational and reciprocating motion. By applying controlled forces and adjusting parameters such as speed, frequency, stroke, and temperature, you can measure friction force, wear, and temperature changes. Real-time monitoring allows comprehensive assessment of wear resistance, friction coefficient, and surface thermal behavior under varying operating conditions.

Operation Instructions

Installation & Inspection: Ensure all connections are secure, power supply is stable, and the control system is functioning correctly.

Sample Preparation: Prepare friction pair materials and securely fix the samples in place.

Parameter Setting: Use the touchscreen to set test force, rotational speed, frequency, stroke, temperature, and friction pair type.

Start Testing: Confirm settings and start the experiment while monitoring the parameters in real time.

Data Recording & Analysis: After the test, save the data and analyze friction and wear performance using dedicated software.

Experimental Procedure

Select Friction Pair & Parameters: Choose friction pair materials and configure test parameters such as load, frequency, stroke, and temperature.

Prepare Samples: Fix the samples in the testing position, ensuring good contact with the friction pair.

Conduct Testing: Start the experiment, monitoring friction force, temperature, and other parameters in real time.

End Testing & Data Processing: Record the results and use software to analyze wear, friction coefficient, and generate a complete test report.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Automatic Textile Fiber Blend Ratio Testing System ISO Certified
Automatic Textile Fiber Blend Ratio Testing System ISO Certified Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 14342-1993: Synthetic short fiber specific resistance tes...
​Carbon Arc Aging Chamber
​Carbon Arc Aging Chamber Whats/App: +86 156 1874 6768 Web: standard-groups.com Carbon arc aging chamber is mainly used to simulate the destructive effects of ultraviolet ...
Aerosol Sensor Test System,Aerosol and Dust Monitors Test System
Aerosol Sensor Test System,Aerosol and Dust Monitors Test System Whats/App: +86 156 1874 6768 Web: standard-groups.com The Aerosol Sensor Test System is designed for development, testing, and calibration of act...
Spinneret Inspection Microscope,automatic spinneret mirror inspection instrument
Spinneret Inspection Microscope,automatic spinneret mirror inspection instrument Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction ① Mechanical Components Overview 1. This machine employs an X-Y-Z three-axis...
Photovoltaic Acid Corrosion Test Chamber
Photovoltaic Acid Corrosion Test Chamber Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Photovoltaic Acid Mist Test Chamber is a specialized device designed to s...
供应产品

Same products

不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 卖方: 863048 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1,FCAW不锈钢焊丝,AWS A5.22药芯焊丝,304不锈钢焊接耗材,低碳不锈钢药芯焊丝,耐高温不锈钢焊丝,...
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 卖方: 863048 迅卓不锈钢药心焊丝 E317LT1-1 分类: Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан...
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding 卖方: Beijing JCZ Technology Co., Ltd The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre...
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal 卖方: Beijing JCZ Technology Co., Ltd TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig...
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner 卖方: Beijing JCZ Technology Co., Ltd The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las...