TTF tensile testing machine
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The TTF tensile testing machine is designed to provide high and stable tensile forces in tensile tests. Mostly for toys
Destructive tension test; The cylinder provides power; The clamp of the specimen can be adjusted to any suitable position.
Application
Materials Development Support: Providing fundamental mechanical data for new material research and development, such as interface bonding strength testing of composite materials, guiding material formula optimization.
Quality Control and Inspection: Conducting random inspections of raw materials or finished products on the production line, such as testing the tensile strength of the insulation layer of wires and cables, to prevent substandard products from entering the market.
Teaching and Research Applications: University laboratories use this equipment for materials mechanics course experiments, while research institutions use it to study the mechanical behavior of materials under extreme conditions.
Process Optimization Basis: By testing material properties under different process parameters, such as the effect of heat treatment temperature on metal yield strength, it provides data support for production process adjustments.
Failure Analysis Assistance: Performing tensile tests on fractured components, combined with fracture surface morphology analysis, to trace material or design defects. For example, analyzing the cause of aircraft turbine blade fracture.
Multi-industry Versatility: Applicable to a variety of materials such as rubber, plastics, metals, textiles, and composite materials, covering the testing needs of industries such as automotive, aerospace, construction, and electronics.
Dynamic Performance Research: Using high-speed tensile attachments, testing the dynamic response of materials under impact loads, such as evaluating the dynamic tensile performance of high-strength steel in automotive collision safety design.
Environmental Adaptability Testing: Conducting tensile tests in high-temperature, low-temperature, or corrosive environments to assess the performance stability of materials under extreme conditions. For example, testing the low-temperature toughness of materials used in polar scientific research equipment.
Standards
EN 71-1:Safety of toys - Part 1: Mechanical and physical properties
ASTM F963:Standard Consumer Safety Specification for Toy Safety
16 CFR 1500:Federal Hazardous Substances Act (FHSA) Regulations
ISO 8124-1:Safety of toys - Part 1: Safety aspects related to mechanical and physical properties
GB 6675-2:Safety of toys - Part 2: Mechanical and physical properties
TTF Test Method
Applicable: All McDonald's products required for TTF testing.
All kinds of children products can be tested on the TTF Tensile Tester.
Test Conditions
Room temperature: 23±2℃， humidity 20% —— 70%.
TTF test machine travel speed: 0.7±0.1in/sec.
TTF test engine air pressure: 60±10psi (4.2±0.7kgf/cm)
在线联系供应商
Other supplier products
 |
Thermal Conductivity Tester for Silicone and Ceramic Substrates | Get a quote： Web: qinsun-lab.com Email：serving@qinsun-lab。com Thermal Conductivity Tester for Silicone and Ceramic Substrates is a high-precisio... |
 |
Syringe slide performance tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Syringe Slide Performance Tester is a specialized instrument designed to measu... |
 |
Simulation Test Dummy | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Simulation Test Dummy is a high-fidelity anthropomorphic test device (ATD) spe... |
 |
Film impact tester ASTM D2794 | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The film impact testing machine, through the hemispherical punch at a certain spee... |
 |
Deval abrasion testing machine ASTM D6928 | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Deval Abrasion Testing Machine is designed to measure the wear resistance of s... |
Same products
 |
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 | 卖方: 863048 | 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，... |
 |
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 | 卖方: 863048 | 迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | 卖方: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | 卖方: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
 |
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner | 卖方: Beijing JCZ Technology Co., Ltd | The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las... |
