Custom five-finger scratch testing system
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Applications
The Five-Finger Scratch Tester is suitable for testing automotive interior materials, plastics, rubber, leather, coated fabrics, coated materials, composite materials, paints, inks, soft metals, and other industries. It is widely used in product quality control, performance verification for new product development, and testing by inspection agencies. It is applicable for determining material properties in production department quality control, third-party testing agencies, laboratory product performance verification, and quality and technical supervision departments.
Standards
FORD FLTM BN 108-13 Scratch Resistance Test for Automotive Exterior Components (e.g., Painted Plastic Surfaces)
General Motors DMN 3943 Test Method for Scratch Resistance of Automotive Interior Materials
Daimler-Chrysler LP-463DD-18-01 Surface Scratch Resistance Test for Automotive Interior Component Materials
Features
1. Utilizes an LCD screen to control and display the testing process, allowing users to freely configure parameters such as test load, stroke, and movement speed according to requirements. The unique sample fixture design ensures secure clamping and convenient operation.
2. The equipment employs high-quality stepper motor control with guide rail transmission for both lateral and longitudinal movements. This design minimizes clearance, delivers smooth motion with low noise, achieves high testing accuracy, ensures excellent data repeatability, and extends the equipment's service life.
Parameters
| Item | Specifications |
|---|---|
| Test Mode | Automatic |
| Test Speed | 10–200 mm/s |
| Stroke | 10–200 mm |
| Number of Scratches | Configurable |
| Scratching Head Size | Interchangeable arbitrarily |
| Scratching Head Lifting | Manual |
| Control Screen | Intelligent touchscreen |
| Scratching Fingers | 5 pieces |
| Overall Dimensions (L×W×H) | 650mm×600mm×700mm |
| Weight | 45 kg |
Test Procedures
I. Preparation:
1. Inspect accessories: Ensure all components are present, including the scratching finger, weights, shaft rod, etc.
2. Secure Test Specimen: Place the test specimen flat on the testing platform and secure it with clamping blocks.
II. Installation and Parameter Setup:
1. Install Scratch Fingers: Attach scratch fingers (e.g., tungsten carbide tips) to the bottom of five independent shaft rods and hang weights.
2. Set Parameters: Configure test load (e.g., weight of weights), stroke distance, movement speed, and cycle via the LCD screen.
III. Test Execution:
1. Initiate Test: Activate the instrument. The guide rail begins transmission, and the scratching fingers scrape the sample surface back and forth according to preset parameters.
2. Observe the process: Ensure stable equipment operation during testing and avoid external interference.
IV. Conclusion and Analysis:
1. Stop the test: After the timer ends, the guide rail automatically stops. Raise the cross-axis support.
2. Remove the sample: Loosen the clamping block, remove the specimen, and inspect indicators such as scratch depth and width.
3. Evaluate data: Compare the scratch resistance of different specimens and analyze material properties.
在线联系供应商
Other supplier products
 |
Dry Sand Rubber Wheel Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machi... |
 |
Retroreflectometer analyzer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system supports compliance with the following standards: GB/T 28468-2012 &n... |
 |
Cabin air filter PM and VOC removal efficiency test system | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Test System for both particle separation and gas absorption/desorption of of ... |
 |
Solid Auto-Ignition Point Tester | ASTM E659 Ignition Temperature Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards It meets the requirements of GB/T 21756-2008 "Determination of Rel... |
 |
Geosynthetic Direct Shear Drawing Friction Tester | ASTM D5321 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Specification For direct shear test, adopt detachable drive unit, which can ... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
