Bundle wire and cable burning test machine IEC60332
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The bundled wire and cable combustion testing machine is manufactured in strict accordance with GB/T 18380.31-2022. equivalent to IEC 60332-3-10:2009 standards. It is used to evaluate the ability of vertically installed bundled wires, cables, or optical cables to inhibit vertical flame propagation under specified conditions. This testing equipment is independently developed and manufactured by Shanghai Qianshi Precision Electromechanical Technology Co., Ltd., offering high cost-effectiveness and comprehensive after-sales service.
Application
Apply to evaluate suppression ability of spread of fire for bundles installed wires and cables ,under specified conditions.
Standards
IEC60332-3-10:2000:Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables
GA306.1-2007:Flame retardant and fire resistive cables - Classification and requirement for flame retardant and fire resistive cables with plastic insulation - Part 1: Flame retardant cables
Parameters
| Feature/Specification | Details |
|---|---|
| Overall Space Size | 2500mm (length) * 3200mm (width) * 4500mm (height) |
| Material | Thermal insulation with a heat transfer coefficient of 0.7W∙m⁻²∙K⁻¹, i.e., coated 65mm thick mineral fiber stainless steel plate |
| Air Source | Control gas flow through the box at (5000 ± 500) L/min, stabilize air flow rate during test; spraying device to forcibly stop burning after test completion |
| Steel Ladder Type | Standard steel ladder width: 500mm; Wide steel ladder width: 800mm |
| Discharge Purification Device | Test box equipped with a collection and washing smoke device that does not alter air flow through the test box |
| Ignition Source | One or two belt-type propane gas burners with supporting flow meters and venturi mixers; fire supply surface drilled with 242 flat metal plates with 1.32mm diameter apertures, center distance of 3.2mm, staggered in three rows of 81. 80. and 81 holes respectively, within a nominal size of 257×4.5mm; additional guide holes on each side of spout plate to maintain steady flame burning |
| a) Flow Control | Each burner equipped with a rotameter for accurate control of propane and air inflow rate |
| b) Airflow Rate (Test Conditions: 100kPa, 20℃) | Air: (77.7 ± 4.8) L/min; Propane: (13.5 ± 0.5) L/min |
| Ignition Source Position | Torch placed horizontally, (75 ± 5) mm away from front surface of cable sample, (600 ± 5) mm away from bottom of test box, symmetrical with axis of steel ladder; ignition point located in center between two rungs of steel ladder, at least 500mm away from lower end of sample |
| Observation Window | Tempered glass observation window surrounded by stainless steel edge |
| Exhaust System | Spiral exhaust fan; 2 sealing push and pull plates; 2.0mm stainless steel |
| Air Inlet | 1 (Φ160mm) |
| Bottom Fixed Frame | 40mm * 40mm square tube production |
在线联系供应商
Other supplier products
 |
Pipe coating scratch tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Pipe Coating Scratch Tester, also known as a paint and varnish scratch resista... |
 |
Yarn length tester - lab instrument | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Compliance Standards FZ/T 70001-2003. FZ/T 71004-2... |
 |
Fogging Tester | Testing Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Fogging Tester is mainly used to test the evaporation of volatile components in ma... |
 |
Alcohol abrasion tester ASTM D6279 | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Alcohol Abrasion Tester is designed for evaluating the wear and friction resis... |
 |
Urinary Catheter Strength Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Urinary Catheter Strength Tester is designed to evaluate the physical strength... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
