Laboratory PVT coolant pulse testing equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The PVT Coolant Pulse Test Machine complies with a broad range of international automotive standards, including:
VW 78007 / TL 82048 / TL 81165 / TL 874 (4.4) – Volkswagen Group specifications for cooling system and interior material performance
TL 82002 / TL 52682 / TL 886 / TL 889 / TL 82086 – Volkswagen Group specifications for system component material performance and durability
PV 1712 (Ag 99-03) / GMW3155 – Fiat / General Motors engineering specifications for materials and component performance
PTL14052-A1203 / PTL14100-A0911 – Internal technical standards for component functionality and reliability
BMW LH 10356681 (10.5) / LH 10757369 (6.) / QV 17004 – BMW Group engineering specifications for material and component functionality and durability
BMW LH 7823444.6 / LH 10591317 / LH 10274837 – BMW Group engineering specifications for system component performance and functional validation
DIN 73411-2 [39] / Daimler M139 (2) / M177 (2) – Daimler engineering specifications / German industrial standards for component material and functional testing
Parameters
| Parameter | Details |
|---|---|
| Machine Dimensions | 4350 mm × 2520 mm × 2150 mm (W × H × D) |
| Test Chamber Internal Dimensions | 1800 × 1000 × 1000 mm (W × H × D) |
| Rated Power | 60 kW |
| Test Medium | Glycol / Water |
| Pressure Range | 0 … 5 bar |
| Medium Flow Control | Up to approx. 100 l/min |
| Linear Motion | ±25 mm at 1 Hz ±12 mm at 5 Hz ±6 mm at 10 Hz ±2 mm at 20 Hz |
| Test Medium Temperature Range | -40°C … +150°C |
| Environment Temperature Control Range | -40°C … +150°C |
| Test Channels | 8 |
Features
Combines linear and eccentric motion mechanisms for pressure pulse testing.
Operates in a pressure range of 0.1 … 5 bar.
Heats the test chamber by monitoring maximum surface temperature limits.
Automatic leak detection and leak testing with shutdown of failed samples.
Integrated recirculation pump prevents coolant leakage.
Windows / LabView-based control unit for data acquisition and monitoring.
Accessories
Test hoses and fittings
Data acquisition sensors
Leak detection probes
Temperature control modules
Linear and eccentric motion actuators
Test Procedures
Install the component to be tested in the test chamber.
Connect the test medium (glycol/water) and set the desired flow rate.
Configure test parameters including pressure range, linear/eccentric motion frequency, and temperature range.
Start the test via the Windows/LabView control unit.
Monitor real-time data for pressure, temperature, and leak detection.
The machine will automatically stop and alert you if a sample fails.
Record and export test results for analysis.
Maintenance Information
Regularly check and clean the recirculation pump and medium lines to prevent blockages.
Inspect motion actuators for wear and lubricate as recommended.
Calibrate pressure and temperature sensors periodically to ensure accurate testing.
Clean the test chamber and remove any residue from previous tests.
Update the control software and verify data acquisition integrity.
在线联系供应商
Other supplier products
 |
Large diameter blasting test machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The large-diameter blasting test machine can perform continuous (linear) pressure testing o... |
 |
fingertip hand abrasion tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Functionality of a product is considered as a matter of course, so the perception of qualit... |
 |
Aerosol Foams Flammability Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This product complies with "Recommendations on the Transport of Dange... |
 |
Bone Plates Static Four - point Bending Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plates Static Four-Point Bending Tester is a specialized mechanical testing device... |
 |
Degradation Testing chamber for PV Modules | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Light Decay Test Chamber is a high-precision indoor exposure system speci... |
Same products
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
