Pneumatic Bursting Strength Tester
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
Bursting Strength Testeris widely used in textile , leather , paper and other fields. The bursting strength and height of woven, knitted, non-woven fabric, paper or board are measured by air pressure drum. It is the basic equipment for testing physical strength and strength of materials.
Mullen Bursting Strength Tester
Standard
ASTM D3786.AS2001.2.4.BS EN ISO 13938-1.GB/T 7742.ISO 13938-1.JIS L1018/L1093.IWSTM170
Main models
Common models for the C, A
Instrument features
1. the use of Mitsubishi 16-bit industrial-level MCU control, with strong anti-interference ability;
2. Equipped with Putian MT-300K printer, a test report can be printed with the output data.
Technical Parameters
Sensor Type: Pressure Transducer
Indicator Type: Digital Display
Operation Mode: Fully Automatic
Force Units: kPa, psi (lbs/in²), kgf/cm², with unit switching function
Burst Resistance Measurement Range: 250-5600 kPa
Clamp Ring Material: SUS#304 Stainless Steel
Clamp Ring Inner Diameter: Upper and Lower Clamp Rings φ31.5 ± 0.05 mm
Hydraulic Oil: 85% glycerin, 15% distilled water
Pressing Speed: High-Pressure Type 170 ± 10 ml/min
Accuracy: ±0.5%
Automatic Clamping and Release Device, Specimen Holding Force: >690 kPa
Dimensions: (L×W×H) 445 × 425 × 525 mm
Weight: 70 kg
Power: 120 W
Power Supply: 1∮AC220±10%, 50Hz
Standard Configuration: 1 rubber membrane, 1 wrench, 10 calibration sheets, 1 bottle of glycerin.
Optional: 1 air pump
G229B Bursting Strength Tester
Standards
▶ GB/T 7742.1 Textile fabrics bursting properties - Part 1: Determination of bursting strength and expansion ratio;
▶ASTM D3786 Test method for hydraulic bursting strength of textiles: diaphragm type bursting strength test method;
▶BS EN ISO 13938-1 Textile bursting characteristics, Hydraulic method for bursting strength and bursting expansion;
▶BS 3424-6-B Hydraulic method for determining fabric bursting strength;
▶ISO 3303-B/3303.2 Glued or plastic coated fabrics. Determination of tear strength;
▶ISO 2758 Paper. Determination of brittle fracture strength;
▶ISO 3689 Determination of bursting strength after immersion;
▶JIS L1018 Test method for knitted fabric;
▶JIS L1093 Test method for gap strength of textiles;
▶IWS TM170 International Wool Bureau Standard
Scope of application
Digital bursting strength testeris used for the detection of woven, knitted, non-woven fabrics, paper or board about the bursting strength and height.
Instrument features
A. Meet the maximum 100cm2 test area
B. Uniform clamping force, can be applied to all kinds of materials in all directions
C. Support online communication
D. Experimental area can be replaced, suitable for different standards
E. Store 50 custom standards
F. Test results such as: rich burst strength, bursting strength, diaphragm pressure, bursting height, and bursting time; make quality control personnel comprehensively understand the bursting performance of the sample.
G. Security shield automatic detection can automatically correct and exclude the film itself on the results
Instrument Configuration
1. One host
2. A set of the next clip ring (5)
3. Expanded broken film 1 package
4. Silent pump 1 set
5.Glycerine 1 bottle
6.Test rubber film (2 pieces)
7.Mute laboratory air compressor (optional)
Technical Parameters
A. Pressure: air pressure method
B. Measuring range: 0-1000kPa, accuracy: 0.2%
C. lower clip ring: 7.3cm2. 7.8cm2. 10cm2. 50cm2. 100cm2
D. Maximum expansion: 70 ± 0.02mm
E. Pressing rate: 1 ~ 100 kPa / min, speed adjustable
F. Output: print output, display output, real-time color graphics display
G. Power supply: Ac220V 50Hz 2000W
在线联系供应商
Other supplier products
 |
Thermal Radiation Flame Spread Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Thermal Radiation Flame Spread Tester is designed to evaluate the combustion c... |
 |
Fogging Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Fogging Tester is mainly used to test the evaporation of volatile components in ma... |
 |
Universal Wear Tester(UWT)/Stoll Quartermaster | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Application Universal Wear Tester (UWT) is used to... |
 |
Carbon Arc Weathering Test Chamber ASTM G153 | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Carbon Arc Weathering Test Chamber is a globally recognized instrument for acceler... |
 |
Dry fallen wadding tester G275 | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The G275 dry fallen wadding tester evaluates shedding performance of medical nonwo... |
Same products
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: 868255 | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
