Condiment packet pressure measuring machine

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

The design and manufacture of the pressure resistance tester for sauce packets usually comply with a series of national and international standards to ensure the accuracy and reliability of test results. These standards may include, but are not limited to:

- Relevant packaging pressure - resistance strength test standards such as GB/T 10004. These standards specify the test methods for the pressure - resistance performance of packaging materials, specimen preparation, test conditions, etc.

- Specific food packaging safety standards, such as the safety standards for food - contact materials, to ensure that the products will not be contaminated or endangered during the testing process.

Features

1. Multi-station synchronous testing: Standard configuration includes a 6-station testing station, capable of testing 6 samples at a time. Customization with additional stations is supported to meet the sampling inspection needs of large-scale production scenarios. A condiment company reported that after using this instrument, the testing time for a single batch was reduced from 2 hours to 20 minutes, a 6-fold increase in efficiency.

2. High-precision sensor system: Employs a 0.1-level precision sensor, supporting multi-range switching (e.g., 0-500N, 0-1000N), accurately capturing minute pressure fluctuations. For example, when testing 0.1mm thick aluminum foil composite film, the instrument can still distinguish a frictional force difference of 0.01N.

3. Intelligent operation and data management: The 7-inch touchscreen supports four-level access control to prevent accidental operation; test data is automatically stored and tamper-proof; a built-in micro-printer can generate reports with one click, complying with GMP and FDA regulations. Optional computer communication software enables data traceability, audit trails, and electronic signature functions.

4. Full-scenario adaptability: Supports pressure testing (simulating stacking pressure) and burst strength testing (determining ultimate pressure resistance), covering the entire life cycle of sauce packets from production to consumption.

Technical Parameters

Technical Parameter	Specification
Test Pressure Range	Usually adjustable within a certain range, such as from 0.1 MPa to 0.7 MPa (equivalent to a pressure of 1 - 50kg) to adapt to different sauce packets and test requirements.
Test Time	Can be set according to actual needs, usually with a wide adjustment range, such as from 1 second to hundreds of thousands of seconds.
Specimen Size	Generally suitable for specimens of certain sizes, and the specific size range may vary depending on the device model. In actual testing, appropriate cutting or adjustment is required according to the size and shape of the sauce packets.
Control System	Modern pressure resistance testers for sauce packets usually adopt advanced control systems, such as micro-computer control or PLC control, to achieve automated operation and precise control. These systems usually have a user-friendly interface and easy-to-operate functions, such as pressure adjustment and data recording.
Data Recording and Analysis	Usually equipped with a data recording system and analysis software, which can automatically record data such as pressure changes and specimen deformation during the test and generate detailed test reports. This data can be used for subsequent product quality analysis and improvement.
Safety Devices	Usually equipped with various safety protection devices, such as emergency stop buttons and overload protection. These devices can quickly cut off the power supply or stop the test in case of an emergency to prevent equipment damage or personal injury.

Accessoriess

1. Multi-size sample clamps: Adaptable to sauce packets of different sizes and shapes, ensuring stable sample fixation during testing;

2. Spare pressure sensor: Used for replacement in case of sensor failure, ensuring the accuracy of pressure test data;

3. Calibration standard weights: Auxiliary equipment for periodic calibration of pressure parameters to maintain test accuracy;

4. Data transmission cable: Connects the instrument to a computer for exporting and storing test data;

5. Sample protective pad: Placed between the sample and the clamp to prevent scratches on the surface of the sauce packet during testing;

6. Spare emergency stop button: A spare part of the emergency protection device, improving equipment safety.

Test Procedures

1. Sample Preparation

Prepare the sauce packet sample according to the specified size and shape, ensuring the sample surface is flat and undamaged.

2. Instrument Settings

Set the test parameters of the pressure resistance tester according to the test requirements, such as test speed and test pressure.

3. Test Procedure

Place the sample on the test platform and start the instrument. During the test, the instrument will gradually increase the pressure until the sauce packet ruptures or reaches the set maximum pressure value. The instrument will automatically record and calculate the pressure resistance of the sauce packet.

4. Data Recording

After the test is completed, record and save the pressure resistance value for subsequent analysis and comparison.

Other supplier products

	Temperature humidity vibration chamber with RF absorption	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Transparent Absorbing Wave Temperature and Humidity Vibration Test Chambe...
	Thermal Conductivity Tester(Light/Laser Flash Method)，light flash thermal conductivity measurement device for electronics materials	Whats/App: +86 156 1874 6768 Web: standard-groups.com Transient Laser Flash Thermal Conductivity Tester is a high-precision instrument designed t...
	Goggles Puncture Resistance Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable standards: GB 811-2010 ECE R22.05 EN1077 Purpose It is to make a certain ...
	Floor Material Burning Performance Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Thefloor coverings flammability testeris used to tester a variety of flooring materials, su...
	Torque - to - Failure Tester for Metal Bone - connecting Screws	Standard YY/T 0662-2008(Chinese standard for orthopedic implant testing) ISO 5832-1(Metallic materials for surgical implants – Wrought stai...

供应产品

Same products

	Surface adhesion testing equipment factory price	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards JIS L 1066 (Testing Methods fo...
	Continuous load scratch resistance tester manufacturer	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO DIS 12137-2 (Plastics &mda...
	High precision continuous load surface tester	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for...
	Multi-function surface performance test system	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for...
	Laboratory tribology research equipment	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for...