meChanical scratch tester for coating adhesion testing
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
(1) GB/T 23989-2009 – Determination of scratch resistance of coatings
(2) GB/T 5210-2006 – Paints and varnishes – Pull-off adhesion test
(3) GB/T 1768-2006 – Determination of abrasion resistance of paint films
(4) ISO 1518-1 – Paints and varnishes – Scratch test – Part 1: Determination of scratch resistance
(5) ISO 20502 – Coating materials – Scratch test
(6) ASTM C1624 – Standard test method for adhesion and scratch resistance of ceramic and hard coatings
(7) DIN EN 1071-3 – Advanced technical ceramics – Mechanical properties of ceramic coatings – Part 3: Scratch testing
Parameters
| Parameter | Specification |
|---|---|
| Stylus moving speed | 35 mm/s |
| Maximum panel size | 100 × 150 × 1.6 mm |
| Maximum coating thickness | 0.3 mm |
| Applicable standard setting | ISO 1518-1 |
| Standard test load | 20 N |
| Power supply | 230 VAC, 50 Hz |
Features
Mechanical drive system enclosed by a protective cover for stable and safe operation.
Constant sliding speed of approximately 3–4 cm/s.
Rigid, well-balanced stylus arm that minimizes vibration and instability during scratching.
Equipped with a 1 mm tungsten carbide ball stylus fixed at 90° to the test panel.
Stylus can be easily removed for inspection or replacement.
Tungsten carbide tip provides long service life without frequent replacement.
Adjustable loading system with selectable weights from 100 g to 2 kg (0–20 N).
Optional additional weight up to 10 kg available for testing harder coatings.
Compatible with standard metal panels up to 150 × 100 mm and thickness up to 1.65 mm.
Optional transparent plastic safety cover to prevent accidental contact during operation.
Accessories
(1) 1 mm tungsten carbide ball stylus
(2) Standard weight set (100 g to 2 kg)
(3) Optional additional weight kit (up to 10 kg)
(4) Optional transparent protective cover
Test Procedures
Specimen preparation
Mount a standard coated metal panel (up to 100 × 150 × 1.6 mm) into the clamping fixture.
Ensure the panel is flat, clean, and firmly secured.
Load setting
Select the required weight according to the test standard or evaluation objective.
Place the weight above the stylus to apply the desired normal force.
Scratch execution
Start the instrument to move the panel at a constant speed of 35 mm/s.
The tungsten carbide stylus scratches the coating along a straight path.
Breakthrough detection
Monitor the voltmeter: when electrical contact is detected between stylus and metal substrate, coating failure is confirmed.
Result evaluation
Record the applied load at which visible damage or breakthrough occurs.
Compare results with standard requirements or reference panels.
在线联系供应商
Other supplier products
 |
Vertical low temperature cold resistance meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product description: This machine is used to test finished shoes, rubber, plastic, soles, ... |
 |
Knee Joint Prostheses Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, in... |
 |
Room Corner Test Machine, ISO 9705. En 14390 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction： According to ISO 9705 of building materials fire prevention performance stan... |
 |
Cabin Air Filter Test System（Gas Adsorption） | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Evaluating gas adsorption and desorption performance of cabin air filter eleme... |
 |
High Temperature Half Mannequin | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The High-Temperature Half Mannequin is suitable for testing a variety of prote... |
Same products
 |
Surface adhesion testing equipment factory price | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards JIS L 1066 (Testing Methods fo... |
 |
Continuous load scratch resistance tester manufacturer | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO DIS 12137-2 (Plastics &mda... |
 |
High precision continuous load surface tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for... |
 |
Multi-function surface performance test system | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for... |
 |
Laboratory tribology research equipment | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for... |
