ASTM C518 High-Precision Heat Flow Measurement System
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ASTM C518: Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus.
ASTM C1784: Standard Test Method for Thermal Storage Performance of Phase Change Materials and Products Using a Heat Flow Meter Apparatus.
ISO 8301: Determination of Steady-State Thermal Resistance and Related Properties of Thermal Insulating Materials by Means of a Heat Flow Meter.
JIS A1412: Method for Determining Thermal Conductivity of Insulating Materials.
EN 12667: Thermal performance of building materials – Determination of thermal resistance by heat flow meter and guarded hot plate method for high and medium thermal resistance products.
EN 12664: Thermal performance of building materials – Determination of thermal resistance by heat flow meter and guarded hot plate method for medium and low thermal resistance dry and wet products.
Parameters
| Model | Material | Sensor Type | Thermal Conductivity (W/m·K) | Specific Heat | High Conductivity Kit (W/m·K) | Sample Size (mm) | Test Time (min) | Accuracy (k) | Repeatability (k) | Plate Temp Range (°C) | Factory Calibration | Standards |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HFM-1 | Insulation, solids, textiles | Flux sensors (x2) | 0.002–0.5 | Optional | Up to 2.5 | 300×300×max 100 | 30–40 | 1–2% | 0.5–1% | 20–75 | Yes | ASTM C518. C1784. ISO 8301. JIS A1412. EN 12667. EN 12664 |
| HFM-2 | Insulation, solids, textiles | Flux sensors (x2) | 0.002–0.5 | Optional | Up to 2.5 | 300×300×max 100 | 30–40 | 1–2% | 0.5–1% | -30–110 | Yes | ASTM C518. C1784. ISO 8301. JIS A1412. EN 12667. EN 12664 |
| HFM-3 | Insulation, solids, textiles | Flux sensors (x2) | 0.002–0.5 | Optional | Up to 2.5 | 200×200×max 50 | 30–40 | 1–2% | 0.5–1% | -20–70 | Yes | ASTM C518. C1784. ISO 8301. JIS A1412. EN 12667. EN 12664 |
| HFM-4 | Insulation, solids, textiles | Flux sensors (x2) | 0.01–0.3 | N/A | N/A | Max 300×300×25 | 20 | 3% | 1% | 10–75 | Yes | ASTM C518. C1784. ISO 8301. JIS A1412. EN 12667 |
Features
Heat Flux Measurement: Thermopile-based sensors integrated with surface thermocouples; low calibration requirement improves measurement accuracy.
Temperature Control: Peltier elements provide precise heating and cooling, with temperature resolution <0.01°C for optimal thermal testing.
Thickness Measurement: Automated or manual sample thickness measurement using optical encoders with <0.05 mm accuracy, ensuring precise thermal resistance calculations.
Flexible Operation: Measurement via front control panel or HFM software on Windows; supports automated temperature steps, result export, and printing.
Clamping Control: Automatic for rigid materials; manual input for compressible materials ensures optimal contact.
Reference Materials: NIST-certified standard reference materials (SRM) included, with optional custom thermal standards for specialized applications.
Accessories
Standard reference materials (glass fiber board and EPS foam board).
Optional high thermal conductivity kit.
Sample support fixtures for small or irregular specimens.
Software package for Windows-based control and data management.
Test Procedures
Sample Preparation: Ensure parallel surfaces. Automated thickness measurement is available for rigid samples; manual input for compressible materials (~1 min).
Insert Sample: Place sample between test plates; center smaller or irregular samples (~1 min).
Close Plates: Upper plate automatically lowers; for compressible materials, stops at preset thickness. Plate briefly confirms contact to ensure measurement accuracy (~1 min).
Run Test: Choose single or progressive temperature steps; standard testing time 30–40 minutes. Results can be saved, printed, or exported to Excel.
Maintenance Information
Regularly clean sensor surfaces to prevent debris interference.
Calibrate periodically with NIST reference materials.
Inspect Peltier modules and optical encoders for mechanical wear or misalignment.
Store in a dry, dust-free environment when not in use.
在线联系供应商
Other supplier products
 |
Automotive Clutch Friction Coefficient Test Machine ASTM Standard | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automated Clutch Friction Test Machine is a laboratory test system design... |
 |
Cigarette Draw Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Cigarette Draw Resistance Tester is designed to measure the airflow resistance encounte... |
 |
Filter Dynamic Cycling Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Mainly used for performance testing of filter elements (such as hydraulic oil... |
 |
Protective Clothing Thermal Conductivity Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable Standards: ISO 11092:2014 ASTM D1518-17 ASTM F1868 ISO 5085-1 ISO 9920 The pr... |
 |
Catheter Friction Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Catheter Friction Tester is a precision instrument used to measure the surface friction... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
