Guarded Heat Flow Measurement System
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ASTM E1530: Standard Test Method for Evaluating Thermal Resistance of Materials Using a Guarded Heat Flow Meter.
ASTM E1560-19: Standard Test Method for Thermal Conductivity Measurements with Guarded Heat Flow Meter.
Parameters
| Item | Specification / Description |
|---|---|
| Applicable Materials | Metals, Polymers, Composites, Pastes |
| Sensor Type | Thermocouples (x6) |
| Measurement Direction | Through-thickness |
| Thermal Conductivity Range | 0.1 – 100 W/m·K * |
| Sample Diameter | 50 – 50.8 mm |
| Sample Thickness | Up to 25 mm (0.1 mm optional for soft materials) |
| Test Time | 40 – 60 minutes |
| Accuracy | 3% (k) |
| Repeatability | 1 – 2% (k) |
| Temperature Range | -20 to 310 °C ** |
| Pressure | Automatic, up to 379 kPa (55 psi) |
| Notes | * Materials with conductivity >60 W/m·K must have thickness ≥12.5 mm ** Each system includes a refrigeration circulator |
Replaceable Heat Flow Module: Tool-free replacement of the calibrated heat flux sensor module.
Comprehensive Temperature Monitoring: Multiple thermocouples ensure sample temperature gradient is at steady-state during testing.
Precision Thickness Measurement: Proprietary universal design allows automated thickness measurement for rigid materials or user-defined thickness/pressure for compressible samples. Optical encoders provide ±0.025 mm accuracy.
Temperature Control: Heat exchanger with thermocouples enables precise heating and cooling; lateral heat loss minimized using guarded furnace; software allows precise temperature programming.
Clamping Control: Automatic clamping for rigid samples; software-controlled height/pressure (up to 379 kPa / 55 psi) for soft materials, with automatic stop once desired parameters are reached.
Steady-State Measurement: Ensures accurate thermal resistance and conductivity by maintaining stable temperature gradients through the sample.
Accessories
Contact paste for top and bottom surfaces.
Optional software module for custom temperature programming.
Standard calibration samples with known thermal resistance and conductivity.
Refrigeration circulator for low-temperature testing.
Test Procedures
Sample Preparation: Ensure sample diameter is 50–50.8 mm and top/bottom surfaces are flat and parallel. Apply a thin layer of contact paste (~1 min).
Load Sample: Place the sample into the test stack. For rigid materials, the upper stack applies default system pressure. For soft materials, define the desired pressure or thickness. Parameters can be controlled within the test plan (~1 min).
Measurement: Set single or unlimited temperature steps (up to 300°C). Internal red backlight indicates test in progress (~40–60 min).
Export Results: Temperatures of upper and lower test plates are monitored to ensure stability. Thermal resistance and calculated conductivity are displayed in tabular form and can be exported to Excel. Internal blue backlight indicates test completion and safe handling (~1 min).
Maintenance Information
Regularly clean thermocouple and heat flux sensor surfaces to avoid debris interference.
Periodically check calibration using reference samples with known thermal properties.
Inspect mechanical components of motorized stack and encoders to maintain accuracy.
Store in a dry, temperature-stable environment when not in use.
在线联系供应商
Other supplier products
 |
Prefilled Syringe Plunger Force Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Push - force Tester for Prefilled Syringes is widely used in the medical device industr... |
 |
Rubber Sleeve Rebound Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is applicable to a variety of medical and laboratory products, incl... |
 |
Metal Corrosivity Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com standards GB/T 15970 ISO 7539 ASTM G31 GB/T 10125 Scope of Application The metal corr... |
 |
Nonwoven Water Absorption Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Fabric Water Absorption Tester is designed to test the ability of terry fabri... |
 |
Industrial SRV High-Frequency Friction and Wear Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (ASTM D5706) Determination of Extreme Pressure Properties of Lubricating Greases... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
