Respirator Fit Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Qinsun PortaCount Respirator Fit Tester assesses the overall integrity of masks by performing an aerosol leak test using the PortaCount particle detector. The instrument operates under controlled negative pressure and constant airflow, providing accurate quantitative fit measurements. Masks are tested on a full headform with an enhanced bladder seal system to simulate real-life usage, allowing the mask’s head harness to function naturally and ensuring more precise test results.This system eliminates the guesswork and variability of qualitative fit tests, providing objective and repeatable evaluation of mask fit and protection performance.
Application
The PortaCount Respirator Fit Tester is suitable for fit and integrity testing across the following industries and products:
(1) Military and Defense: CBRN gas masks, full-face respirators — overall fit and protection factor assessment
(2) Occupational Safety: commercial respirators, industrial dust masks, half-face and full-face respirators — fit testing and leak detection
(3) Medical and Healthcare Industry: surgical masks, N95/FFP masks, medical respirators — quantitative fit evaluation
(4) Research and Development: development of new respirator models and harness designs, optimization of fit and seal
(5) Quality Control: production batch verification, ensuring proper mask fit for various models and sizes
(6) Third-Party Testing Laboratories: certification testing, evaluation of mask protection factor, exhalation valve and drink tube performance
The instrument is widely used for product development, R&D, production quality control, and laboratory fit testing.
Standards
The instrument complies with and can be applied to the following standards (including but not limited to):
(1) ISO 16975-3:2017 – Respiratory Protective Devices — Selection, Use, and Maintenance — Part 3: Fit Testing Procedures
Features
(1) Separate testing for overall mask integrity (Protection Factor), exhalation valve, and drink tube
(2) Integrated aerosol wand for pinpointing leak locations, enabling immediate evaluation and repair
(3) Full headform configuration allows the mask’s head harness to function naturally, simulating real-life use
(4) Single headform with enhanced bladder seal system provides a tight seal for most gas mask and full-face respirator types and sizes
(5) Easy-to-read display and intuitive step-by-step test sequence minimize operator training requirements
(6) Objective quantitative measurement eliminates the uncertainty of qualitative fit testing
Technical Specifications
| Item | Specification |
|---|---|
| Fit Factor Range | Greater than 10.000. 1–200 |
| Fit Factor Accuracy | ±10% of reading |
| Dimensions | 17 cm × 22 cm × 24 cm (6.75 in × 8.5 in × 9.5 in) |
| Weight | Main unit: 3.1 kg (6.8 lb); With standard accessories and carrying case: 8.2 kg (18 lb) |
| Power Supply | 100 to 250 VAC, 50 to 60 Hz |
| Flow Rate | Sample flow: 350 cm³/min; Total flow: 1000 cm³/min (nominal) |
| Temperature Range | Operating: 0 to 35°C (32 to 100°F); Storage: -40 to 70°C (-40 to 160°F) |
| Alcohol | Operating time: 6 hours at 21°C (70°F); Alcohol type: 99.5%+ Isopropyl Alcohol (Analytical Grade) |
| Carrying Case Dimensions (H × W × D) | 23 cm × 36 cm × 53 cm (9 in × 14 in × 21 in) |
在线联系供应商
Other supplier products
 |
Steam jet durability testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Steam Jet Test Chamber is designed to evaluate the durability and performance of materi... |
 |
Compression Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed... |
 |
Electric pencil hardness tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: This machine is suitable for all kinds of finished product spray har... |
 |
Torch and Grit particle tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can use the apparatus in the following scenarios: Battery housing materia... |
 |
Tracking indices of solid insulating materials Test Machine ,IEC60112 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction This tester is in accordance with IEC60112 standard . It is suitable for ligh... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
