Smoke Density Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Smoke Density Tester, developed by Rohm and Haas in the 1970s based on ASTM D2843. measures smoke optical density during combustion using direct flame impingement (Billung's law). It calculates the Smoke Density Rating (SDR) and is now widely applied internationally for testing PVC conduits and automotive interior materials.
Application
Smoke density meters are widely used in various industries, including but not limited to the following:
Building Materials: Evaluating the combustion performance of building materials to provide a reference for building design and material selection.
Plastics and Textiles: Testing the smoke density produced by these materials during combustion to ensure they meet safety standards.
Fire Safety: Testing the smoke release characteristics of materials by simulating fire environments to provide data support for the fire safety design of buildings.
Environmental Protection: Evaluating the smoke emissions of materials during combustion to ensure they comply with environmental regulations.
Standards
ASTM E662:Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM F814:Test Method for Specific Optical Density of Smoke Generated by Solid Materials for Aerospace Applications
NFPA 258:Research Test Methods for Determining Smoke Generation of Solid Materials
Boeing BSS 7238:Test Method for Smoke Generation by Materials on Combustion
FAR Part 25 Appendix F Part V:Test Method To Determine the Smoke Emission Characteristics of Cabin Materials
Aircraft Materials Fire Test Handbook Chapter 6:Chapter 6 of Aircraft Materials Fire Test Handbook
Airbus AITM 2.0007A:Determination of the Specific Optical Smoke Density of Component Parts or Sub-Assemblies of Aircraft Interior
Airbus AITM 2.0007B:Determination of Specific Optical Smoke Density for Wires and Cables in Aircraft
IMO MSC.61 (67) Annex 1 Parts 1&2:Fire Test Procedures for Ship Materials
ISO 5659-2:Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
IMO FTCP Part 2:Smoke And Toxicity Test
BS 6401:BS 6401 - [Specific Title Related to Smoke Testing](
ABD0031:Airbus Fireworthiness Requirements: Generation of Smoke and Toxic Gases
Features
Durable Teflon-Coated Chamber:
The test chamber is lined with Teflon, providing strong resistance to the corrosive effects of combustion-generated smoke, which significantly extends the lifespan of the equipment.
Clear Visibility Markers:
The bottom of the chamber features an "EXIT" sign in white letters on a red background. This allows test personnel to easily observe the clarity or blurriness of the sample through the transparent observation window.
Precision Light Sensing:
The tester uses an incandescent light source paired with a silicon photodiode as the light sensor, calibrated with cosine corection. Equipped with color filters, it effectively blocks UV and IR light that is not visible to the human eye, ensuring accurate color matching.
High-Pressure Flame Impact:
The main burner applies a flame to the test sample at a pressure of 276 KPA. An auxiliary burner is also included to subject any dripping material to additional flame impact, operating at a gas pressure of 138 KPA to ensure thorough combustion of molten droplets.
Advanced Data Display:
The standard test software provides light transmittance values every 15 seconds, generating a transmittance test curve. After the test, it calculates and displays the SDR (Smoke Density Rating) value, which represents the integral value of the smoke produced.
Comprehensive Test Reporting:
The software can compile and synthesize test reports from three sample groups, creating an SDR smoke density development curve. It also allows simultaneous comparison of SDR values from three tests, automatically determining compliance with testing standards.
User-Friendly Data Management:
Test data can be easily exported to a computer and connected to a printer for convenient report generation and printing, enhancing user accessibility and efficiency.
Purpose
Mainly used for building materials and their products when the static smoke generated by the determination of smoke, is the test of textile materials, solid material burning smoke production of special equipment.
Parameters
| Burning lamp | for the students light, length 260mm, nozzle diameter 0.13mm, 45 ° angle with the smoke box; |
| Photoelectric system | light source for the lamp, power 15W, operating voltage 6V; |
| Exhaust system | the machine is equipped with a strong fan, after the test, the exhaust can be discharged outdoors; |
| Smoke density measurement range | 0 ~ 100%; |
| Smoke density measurement accuracy | ± 3%; |
| Receiver | for the silicon photovoltaic cells, light transmission rate of 0% for the passage of light, light transmission rate of 100% light without cover completely through; |
| Main burner working pressure | 276KPa (adjustable); |
在线联系供应商
Other supplier products
 |
Aluminum tube coating continuity inspection device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The design and manufacture of the continuity tester for the inner coating of alu... |
 |
OSU Rate of Heat Release Apparatus，Fire safety heat release tester for building materials | Whats/App: +86 156 1874 6768 Web: standard-groups.com The OSU Rate of Heat Release Apparatus is a precision instrument designed to measure the he... |
 |
Perspiration Tester 丨Perspiration Test machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Compliant Standards ISO 105 E01: Textiles - Tests for colour fastness - Part E01: Colour f... |
 |
Finished shoe bending tester丨Finished shoe bending test mechine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Finished shoes bending testing machine Finished shoes bending testin... |
 |
Adjustable flame length tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 5169.5: Electrical & Electronic Equipment – Needle Flame Test Meth... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
