Smoke Density Tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

The Smoke Density Tester, developed by Rohm and Haas in the 1970s based on ASTM D2843. measures smoke optical density during combustion using direct flame impingement (Billung's law). It calculates the Smoke Density Rating (SDR) and is now widely applied internationally for testing PVC conduits and automotive interior materials.

Application

Smoke density meters are widely used in various industries, including but not limited to the following:

Building Materials: Evaluating the combustion performance of building materials to provide a reference for building design and material selection.

Plastics and Textiles: Testing the smoke density produced by these materials during combustion to ensure they meet safety standards.

Fire Safety: Testing the smoke release characteristics of materials by simulating fire environments to provide data support for the fire safety design of buildings.

Environmental Protection: Evaluating the smoke emissions of materials during combustion to ensure they comply with environmental regulations.

Standards

ASTM E662:Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

ASTM F814:Test Method for Specific Optical Density of Smoke Generated by Solid Materials for Aerospace Applications

NFPA 258:Research Test Methods for Determining Smoke Generation of Solid Materials

Boeing BSS 7238:Test Method for Smoke Generation by Materials on Combustion

FAR Part 25 Appendix F Part V:Test Method To Determine the Smoke Emission Characteristics of Cabin Materials

Aircraft Materials Fire Test Handbook Chapter 6:Chapter 6 of Aircraft Materials Fire Test Handbook

Airbus AITM 2.0007A:Determination of the Specific Optical Smoke Density of Component Parts or Sub-Assemblies of Aircraft Interior

Airbus AITM 2.0007B:Determination of Specific Optical Smoke Density for Wires and Cables in Aircraft

IMO MSC.61 (67) Annex 1 Parts 1&2:Fire Test Procedures for Ship Materials

ISO 5659-2:Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

IMO FTCP Part 2:Smoke And Toxicity Test

BS 6401:BS 6401 - [Specific Title Related to Smoke Testing](

ABD0031:Airbus Fireworthiness Requirements: Generation of Smoke and Toxic Gases

Features

Durable Teflon-Coated Chamber:

The test chamber is lined with Teflon, providing strong resistance to the corrosive effects of combustion-generated smoke, which significantly extends the lifespan of the equipment.

Clear Visibility Markers:

The bottom of the chamber features an "EXIT" sign in white letters on a red background. This allows test personnel to easily observe the clarity or blurriness of the sample through the transparent observation window.

Precision Light Sensing:

The tester uses an incandescent light source paired with a silicon photodiode as the light sensor, calibrated with cosine corection. Equipped with color filters, it effectively blocks UV and IR light that is not visible to the human eye, ensuring accurate color matching.

High-Pressure Flame Impact:

The main burner applies a flame to the test sample at a pressure of 276 KPA. An auxiliary burner is also included to subject any dripping material to additional flame impact, operating at a gas pressure of 138 KPA to ensure thorough combustion of molten droplets.

Advanced Data Display:

The standard test software provides light transmittance values every 15 seconds, generating a transmittance test curve. After the test, it calculates and displays the SDR (Smoke Density Rating) value, which represents the integral value of the smoke produced.

Comprehensive Test Reporting:

The software can compile and synthesize test reports from three sample groups, creating an SDR smoke density development curve. It also allows simultaneous comparison of SDR values from three tests, automatically determining compliance with testing standards.

User-Friendly Data Management:

Test data can be easily exported to a computer and connected to a printer for convenient report generation and printing, enhancing user accessibility and efficiency.

Purpose

Mainly used for building materials and their products when the static smoke generated by the determination of smoke, is the test of textile materials, solid material burning smoke production of special equipment.

Parameters

Burning lamp	for the students light, length 260mm, nozzle diameter 0.13mm, 45 ° angle with the smoke box;
Photoelectric system	light source for the lamp, power 15W, operating voltage 6V;
Exhaust system	the machine is equipped with a strong fan, after the test, the exhaust can be discharged outdoors;
Smoke density measurement range	0 ~ 100%;
Smoke density measurement accuracy	± 3%;
Receiver	for the silicon photovoltaic cells, light transmission rate of 0% for the passage of light, light transmission rate of 100% light without cover completely through;
Main burner working pressure	276KPa (adjustable);

Other supplier products

	Vacuum Blood Collection Tube Suction Volume Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Vacuum Blood Collection Tube Aspiration Volume Tester is mainly used to d...
	Electric rolling wheel peeling testing machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Electronic pressure roller testing machine (automatic pressure roller machine) specializing...
	ISO Digital flame resistance testing machine	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Flame Spread Test Apparatus is designed to evaluate the combustion behavior o...
	Automotive seat belt wear resistance tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The seat belt abrasion tester is used to evaluate the wear resistance of materials, especia...
	High Low Temperature Low Pressure Test Chamber	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Avionics equipment testing, spacecraft vacuum thermal testing, new energy sec...

All supplier products

Same products

	MMA-120 Handheld Arc Welder	Seller: 871183	The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
	SHX Series Circulating Fluidized Bed Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
	YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
	DHL Series Coal-Fired Steam Boilers	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
	SZL Series Biomass Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...