Rubbing Color Fastness Tester | ASTM ISO Testing Machine
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The G238AA Manual Rubbing Color Fastness Tester is the most commonly used model in the textile industry for testing the color fastness of fabrics to dry and wet rubbing. Under specified conditions, the specimen is rubbed against a standard white cloth, and the degree of staining transferred to the white cloth is evaluated using a gray scale for staining. It is equipped with a crank arm, counter, stainless steel specimen holder, and test heads of 16 mm or 25 mm diameter (providing a vertical pressure of 9 N ±10%).
Application:
Suitable for evaluating rubbing color fastness in textiles, knitted fabrics, leather, electroplated metal plates, printing, and related industries.
Standards:
GB/T 3920
BS 1006 D02
ISO 105 D02 / X12
AATCC 8 / 165
NEXT TM6
M&S C8 / C8A
Accessories and Consumables:
(1) Friction cloth holder
(2) Standard abrasive paper
(3) Standard rubbing white cloth (AATCC/ISO)
(4) Standard rubbing white cloth (SDC)
(5) Calibration fabric
(6) Gray scale for staining (ISO/BS)
(7) Gray scale for staining (AATCC)
Test Procedure:
- Specimen preparation:
(1) The specimen and standard rubbing white cloth shall be conditioned under standard temperature and humidity conditions.
(2) If the specimen contains multiple colors, all colors shall be rubbed.
(3) If the area of each color is sufficient, specimens shall be taken separately.
(4) Cut specimens for both dry and wet rubbing, ensuring all colors are tested.
(5) If the front and back sides differ in material or color, both sides shall be tested.
(6) Dry and wet rubbing tests shall not be conducted on the same area of the specimen. - Dry rubbing:
(1) Place the specimen flat on the tester covered with abrasive paper, aligning the length direction with the motion direction, and fix it with the holder.
(2) Fix the standard white cloth on the rubbing head using a spring clip, and gently place it on the specimen.
(3) Ensure no slipping or wrinkling occurs during rubbing.
(4) Place the rubbing head on the specimen, power on the instrument, and set the number of cycles.
(5) Press START to begin the test; the instrument stops automatically after reaching the set cycles.
(6) Remove the white cloth and evaluate staining using a gray scale. - Wet rubbing:
(1) Fully immerse the standard white cloth in distilled water.
(2) Remove and press it between filter papers to achieve a certain moisture content.
(3) Follow the same steps as in dry rubbing. - Result evaluation:
(1) Before evaluation, gently remove loose fibers from the white cloth using transparent adhesive tape.
(2) Place three layers of unused white cloth under the tested cloth and evaluate staining using the standard gray scale. - Test report:
(1) Report the test standard used
(2) Report results for dry and wet rubbing separately
在线联系供应商
Other supplier products
 |
Air Intake Filter Performance Test System| Testing Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Air Intake Filter Test System is designed to evaluate the filtration performan... |
 |
Computer-controlled Helmet Impact Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com A computer-controlled helmet impact tester is an instrument used to test the impac... |
 |
Safety Helmet Roll-off Testing Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The safety helmet retention test equipment is a device used to evaluate the stabil... |
 |
Waterproof socks testing machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Waterproof Socks Testing Machine is designed to evaluate the water resistance ... |
 |
Coolant pulsation testing machine | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Coolant Pulsation Testing Machine is suitable for a wide range of automotive t... |
Same products
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: 868255 | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
