Car seat center of gravity measuring tester | ASTM ISO Testing Machine
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Car Seat Center of Gravity Measuring Tester is a precision testing instrument used to determine the center of gravity position of automotive seats and seat assemblies. By accurately measuring mass distribution, the system provides reliable data to support seat structural design, safety evaluation, and vehicle-level balance optimization.
The tester is suitable for complete seats, seat frames, and partially assembled seat structures, and is widely applied in R&D verification, quality control, and compliance testing within the automotive seating industry.
Application
(1) Center of gravity measurement of complete automotive seats, including driver seats, front passenger seats, and rear seats.
(2) Testing of manual seats, power-adjustable seats, and seats with memory adjustment systems.
(3) Measurement of seats equipped with integrated functional modules such as airbags, heating systems, ventilation units, and massage components.
(4) Center of gravity determination for seat frames and semi-assembled seat structures during product development and prototype validation.
(5) Comparative analysis of center of gravity distribution for different seat designs, materials, or structural configurations.
(6) Evaluation of center of gravity variation caused by additional trim parts, covers, or accessory modules.
(7) Verification of lightweight seat designs to support vehicle mass reduction and balance optimization.
(8) Quality control inspection of center of gravity consistency during mass production.
(9) Incoming inspection and supplier evaluation of seat assemblies and seat sub-components.
(10) Support testing for vehicle-level mass distribution studies and dynamic performance analysis.
(11) OEM validation testing and third-party laboratory measurement of seat balance characteristics.
Standards
(1) GB/T 15084 – Measurement methods for automotive seat center of gravity (if applicable).
(2) ISO 7250 – Basic human body measurements for technological design (reference for mass distribution analysis).
(3) ISO 5353 – Earth-moving machinery — Seat index point (reference methodology for seat positioning and mass distribution).
(4) OEM internal standards and enterprise technical specifications.
Note: Applicable standards may vary depending on regional regulations and specific OEM requirements.
Features
(1) High-precision measurement system for accurate determination of seat center of gravity position.
(2) Adjustable measurement range to accommodate different seat types, sizes, and configurations.
(3) Supports multiple test methods, including drop method and horizontal method, to meet OEM and laboratory requirements.
(4) High load-bearing capacity suitable for standard automotive seat weights.
(5) High angular resolution ensures precise calculation of center of gravity coordinates.
(6) Rigid aluminum alloy frame combined with suspension weighing structure provides excellent stability and repeatability.
(7) Real-time data acquisition and calculation for efficient test evaluation.
(8) Stable mechanical structure with necessary safety protection ensures reliable and secure operation.
Parameters
| Parameter | Specification |
|---|---|
| Measuring Range | Adjustable, suitable for various automotive seat types |
| Measurement Accuracy | ≤ ±1% (typical, depending on configuration) |
| Test Methods | Drop method, horizontal method, OEM-specified methods |
| Maximum Load Capacity | Suitable for standard automotive seat weights |
| Angular Resolution | High-resolution angle detection |
| Structural Design | Aluminum alloy frame, suspension weighing system |
| Data Acquisition | Real-time measurement and calculation |
| Power Supply | According to laboratory or customer requirements |
| Safety Protection | Mechanical stability design and operational safety protection |
在线联系供应商
Other supplier products
 |
Automotive Wire Cut-Through Tester | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Automotive Wire Cut-Through Tester is designed to evaluate the resistance of a... |
 |
Safety Helmet Impact Acceleration Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The safety helmet impact acceleration tester is an instrument used to test the per... |
 |
Xenon Arc Weather Ometer SI4000 | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Introduction： SI4000Xenon Arc Weather Ometer utilizes a xenon lamp to simulate id... |
 |
Bursting Strength Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Standard ASTM D3786: Hydraulic bursting strength test method for textiles (Diaphr... |
 |
Crash Test Dummy| ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The 50th Percentile FAA Crash Test Dummy is a professional, anthropomorphic test d... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
