Temperature Humidity Vibration Combined Test Chamber

Get a quote：

Whats/App: +86 181 0160 0864

The Temperature-Humidity-Vibration Combined Test Systemis an advanced reliability testing platform that integrates climatic stress with mechanical vibration. By combining a high-performance environmental chamber with an electrodynamic or mechanical shaker, this system allows you to simulate the complex, multi-dimensional stresses that products face in real-world operating environments. It is engineered specifically to identify synergistic failure modes that single-stress tests might miss, making it an indispensable tool for safety screening and durability validation of critical assemblies.

Applications

Aerospace Sector: Evaluates the performance of aircraft components under temperature, humidity, and vibration conditions.

Electronics and Communications Industry: Conducts comprehensive testing on electronic components and communication equipment to assess their reliability in diverse environments.

Materials Science: Assists researchers in investigating changes in the physical and chemical properties of materials under varying environmental conditions, providing data support for new material development.

Automotive Manufacturing: Simulates the environmental conditions automotive components encounter in diverse climates and road conditions to evaluate their durability and reliability.

Standards

GB/T 2423.35‌ Procedures for combined temperature, humidity, and vibration testing, including environmental condition setting and performance monitoring

‌GB/T 28046.3‌ Focuses on automotive electrical and electronic systems, classifying severity by component installation location (e.g., engine, body) to simulate actual operating environments

GB/T 44279-2024 Covers combined temperature-humidity-vibration-low-pressure testing, enhancing simulation capabilities for extreme environments (e.g., high altitude or tropical climates)

IEC 60068-2-53 Test methods for electrical and electronic products under combined temperature, humidity, and vibration environments, emphasizing accelerated exposure of product failure modes through multi-stress superposition

ISO 16750-3 Prescribes coordinated testing of mechanical loads (vibration) and temperature conditions for automotive electronic equipment, ensuring component durability during vehicle operation

Features

1. Simultaneously simulate multiple environmental factors: Capable of concurrently simulating temperature, humidity, and vibration to more closely replicate actual product usage conditions, enhancing test accuracy.

2. Accelerates exposure of potential product defects: Through stress superposition, it expedites the manifestation of latent design flaws, manufacturing imperfections, or premature component failures, providing evidence for design enhancements.

3. Cost savings: Reduces equipment investment and testing space requirements, thereby lowering R&D and testing expenses.

Parameters

Item	Specification
Temperature Range	-60°C ~ +150°C
Temperature Change Rate	≥5°C/min (with load), average over the range of -40°C to 100°C
Temperature Deviation	≤±2°C (no load, steady state)
Temperature Uniformity	≤2°C (no load, steady state)
Temperature Fluctuation	≤±0.5°C (no load, steady state)
Humidity Range	20% R.H. ~ 98% R.H.
Humidity Deviation	+2% R.H. ~ -3% R.H. (when >75% R.H.), ±5% R.H. (when ≤75% R.H.)

Test Procedures

Sample Preparation: Develop test protocols based on product type (e.g., electronic components or metal parts) and record baseline data.

Environmental Simulation: Simultaneously apply temperature (-70°C to 150°C), humidity (10%-98% RH), and vibration stress within the test chamber using a multi-channel closed-loop control system.

Intermediate Inspection: Conduct visual inspections, dimensional measurements, and electrical tests at critical test phases (e.g., temperature peaks), comparing before-and-after data.

Data Analysis: Evaluate specimen responses, identify failure modes (e.g., resonance or material aging), and compile detailed reports.

Accessories

(1) Removable Floor Panels: Customized interface plates to match different shaker head expanders.

(2) Flexible Thermal Bellows: High-temperature silicone or reinforced fabric sleeves to seal the shaker-to-chamber connection.

(3) Multi-Channel Accelerometers: For real-time monitoring of vibration response at different points on the specimen.

(4) Cable Access Ports: Standard 100mm or 150mm ports for power and signal lines to the device under test (DUT).

(5) CCTV Monitoring: High-definition internal camera system to record specimen behavior during high-intensity vibration.

Other supplier products

	Pipe drop hammer impact testing machine	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Product Introduction 1. Name: drop hammer impact testing machine 2. Model :G-1 ...
	Carton drop tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Carton Drop Tester is designed to simulate the impact experienced by packaging...
	Electrode Electrolyte Wetting Testing System	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Electrode Electrolyte Wetting Testing System is a high-precision instrument de...
	Spectrophotometer ISO 7724-1	Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement standards. ASTM E1164. DIN 5033: Compliant with industri...
	Minimum Ignition Energy (MIE) – Dust Cloud Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specime...

供应产品

Same products

	Choosing the Right Equipment for Heavy-Duty Cleaning	卖方: 868255	FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve...
	ER4043 Silicon Aluminum Welding Wire	卖方: 868776	Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin...
	HDPE高速水冷双壁波纹管生产线	卖方: Shandong HUASU Plastic Technology Co.,Ltd.	机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功...
	PanEVAP & MVR system	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...