ASTM F2100 compliant mask airflow resistance meter
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Mask Respiratory Resistance Tester is designed to measure the inhalation and exhalation resistance of respirators and masks under controlled conditions. The instrument simulates real human breathing through a 3D-printed standard head mold and accurately measures flow resistance at specified airflow rates. It provides precise evaluation of mask performance, including ordinary masks, dust masks, medical masks, and anti-fog respirators, and is suitable for both manufacturers and national inspection agencies.
Standards
The instrument complies with and can be applied to the following standards (including but not limited to):
(1) EN 149-2009. Sections 7.15 & 8.3.4 – Respiratory Protective Devices — Testing of Breathing Resistance
(2) EN 13274-3 – Respiratory Protective Devices — Determination of Breathing Resistance
(3) GB 19083 – Technical Requirements for Medical Protective Masks
(4) GB 2626 – Respiratory Protective Equipment: Filtered Particulate Respirator
(5) NIOSH 42 CFR Part 84 – Certification Requirements for Respiratory Protective Devices
(6) JIS/T 8151 – Testing Methods for Respiratory Protective Devices
Features
(1) Touch screen control with English menu and man-machine dialogue mode, easy to operate
(2) Built-in thermal printer for immediate on-site test results
(3) Configurable breath detection and inhalation detection modes
(4) Automatic respirator pipeline switching prevents accidental disconnection or misconnection
(5) 3D-printed standard head mold simulates real human inhalation and exhalation for accurate data
(6) High-precision thermal mass flow sensors with no temperature or pressure compensation required
(7) Micro-manometer sensor with high accuracy (-1000 Pa to 1000 Pa) and adjustable damping
(8) Integrated gas path conversion for rapid switching between inhalation and exhalation pipelines
(9) Data logger with graphic dot-matrix LCD (128 × 64) and 4M memory
(10) Stable suction volume (40–100 L/min) and constant ventilation (85 L/min)
Technical Parameters
| Item | Specification |
|---|---|
| Inhalation Flow Rate | 30 L/min, 95 L/min |
| Exhalation Flow Rate | 160 L/min |
| Flow Impact Test Rate | 300 L/min |
| Flow Sensor | Thermal mass flow meter, high sensitivity |
| Micromanometer Range | -1000 Pa – 1000 Pa, accuracy 1 Pa |
| Head Mold | 3D-printed standard head, simulates human inhalation/exhalation |
| Suction Pump | 40–100 L/min |
| Ventilation Volume | Constant 85 L/min |
| Data Logger | Graphic dot-matrix LCD, 4M memory, Chinese/English interface |
| Power Supply | AC 220 V, 50 Hz |
Accessories
Main testing unit with suction and ventilation system
3D-printed standard head mold
Inhalation and exhalation tubing systems
Thermal mass flow sensor and micromanometer sensor
Built-in thermal printer
Data logger and controller
Power cable
Operation manual
Calibration certificate
在线联系供应商
Other supplier products
 |
High Precision Surgical Needle Strength Testing Instrument Factory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Suture Needle Penetration and Bending Strength Tester is a device used to... |
 |
Shoe heat insulation testing machine -- sand bath | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 20991: Determines thermal insulation of safety shoe soles under simulated ho... |
 |
Fiber Blend Analysis Instrument for Textile Materials ISO/ASTM | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Fully Automated Operation Integrated system performs dispensin... |
 |
Protective Clothing Flame Spread Test Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The tester is used for flame spread test of protective clothing. It is designed and manufac... |
 |
Stick-Slip – Tribological Test Stand (G-H3P)，Stick-slip friction testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Stick-Slip Tribological Test Stand is designed to predict stick-slip noise (“sque... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
