Packaging Leak Testing Machine Supplier
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Bubble Leak Tester utilizes a positive pressure testing principle and is suitable for the quantitative measurement of sealing strength, heat seal quality, burst pressure, and leakage performance of various sealed packages; it can also be used for the quantitative measurement of the sealing performance of various plastic tamper-evident caps, inflatable packaging, ointment tubes, and medical packaging. Simultaneously, it can perform analysis and testing of various bottle body sealing properties, compressive strength, and burst resistance.
Standards
YY/T 0681.5 - 2010：Test methods for sterile medical device package - Part 5: Detecting gross leaks in medical packaging by internal pressurization (bubble test)
Features
• Embedded high-speed microcomputer chip control and a simple and efficient human-machine interface provide users with a comfortable and smooth operating experience.
• 7-inch high-definition color LCD screen displays test data and curves in real time.
• Supports expansion suppression and non-suppression testing.
• Overvoltage safety protection, power-off memory, and other safety features ensure system stability during testing.
• English and Chinese interfaces can be switched freely.
• Equipped with a standard RS232 communication port for convenient external connection and data transmission between the system and a computer.
• Energy-saving and environmentally friendly design, aesthetically pleasing appearance, and ultra-low power consumption power supply meet national energy-saving and environmental protection requirements.
Technical Parameters
| Parameter | Specification |
|---|---|
| Testing Range | Suitable for the gross leak testing under internal pressure of various packages, and the testing pressure range can be customized according to requirements. |
| Testing Principle | Based on the positive-pressure testing principle, a certain pressure is applied to the inside of the package, and it is determined whether there is a gross leak by observing whether bubbles are generated on the outside. |
| Automated Control | Equipped with a PLC industrial control program, which can accurately control the pressure and time, and automatically complete the experiment after setting the test pressure and time. |
| Ease of Operation | With a touch-screen operation interface, it is highly user-friendly and simple to operate. |
| Testing Accuracy | The testing error is usually within ±1%, ensuring the accuracy of test results. |
| Constant Pressure Time | Can be set through the touch-screen, with a range of 1 - 9999 seconds. |
| Air Source Interface | Usually equipped with a Φ6mm polyurethane tube and an 8mm interface for easy connection to the air source. |
| External Dimensions | May vary depending on the model but are usually compact; e.g., some models: 420mm(L)×290mm(W)×280mm(H) |
Accessoriess
StandardAccessories:Usually includes the main unit, a puncture device, a test container, etc.
Optional Accessories:Non-standard devices such as a standard test rack, a three-side testing fixture, a constraint plate testing fixture, and an anti-theft bottle cap removal fixture (selected as needed).
在线联系供应商
Other supplier products
 |
RE Type Side Impact Crash Dummy Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Male Side Impact Dummy (RE Type) is a high-fidelity side impact test dumm... |
 |
Vibration Table | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D999: Vibration testing of shipping containers and packaged products. TAP... |
 |
ISO 6722 Automotive Wire Flame Resistance Test Equipment Supplier Factory Direct | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Dual testing modes: vertical and horizontal flame tests. (2) A... |
 |
Protective Clothing Synthetic Blood Penetration Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction It is applicable to the resistance of the protective clothing to the syntheti... |
 |
Fire safety testing equipment for smoke detectors | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Smoke Fire Detector Threshold Test Chamber is suitable for: Threshold ver... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
