UV Accelerated Weathering Chamber Manufacturer（ASTM Standard）
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Ultraviolet Aging Test Chamber is a laboratory testing system specifically designed for photovoltaic module ultraviolet preconditioning. The chamber simulates long-term outdoor exposure of photovoltaic modules to solar ultraviolet radiation, reproducing UV-induced material aging effects under controlled conditions. By accelerating natural ultraviolet exposure in a laboratory environment, the equipment enables evaluation of ultraviolet aging impacts that would normally take months or years outdoors, supporting verification of UV resistance and structural reliability of photovoltaic modules and encapsulation materials.
Standards
(1)IEC 61215 Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
(2)IEC 61646 Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
Parameters
| Item | Technical Specification |
|---|---|
| Structural material | High UV-blocking, high-sealing, high-thermal-insulation specialized material |
| Total UV irradiation area | ≥2000 mm × 2000 mm |
| Maximum test capacity | Simultaneous testing of 2 photovoltaic modules (2 m × 1 m each) |
| Light source type | Xenon lamp |
| Lamp lifetime (single set) | Approx. 1000 h |
| Spare lamps | 1 set (standard configuration) |
| System cumulative service life | ≥2000 h |
| UVA / UVB energy ratio | UVB accounts for approx. 3%–10% of total energy |
| Irradiance intensity | Approx. 100 W/m² in the 280–385 nm range |
| 280–320 nm proportion | ≤10% |
| Irradiance uniformity | Better than ±15% |
| UVA probe | 320–385 nm, fiber-optic type |
| UVB probe | 280–320 nm, fiber-optic type |
| Module surface temperature | 60 ℃ ±5 ℃ |
| Temperature resolution | 0.1 ℃ |
| Temperature measurement accuracy | ±0.1 ℃ |
| Ozone generation | Negligible |
| Irradiation method | Top irradiation, light source vertically directed at module surface |
| Control mode | Touchscreen control with automatic monitoring and light source cut-off |
Features
Large irradiation area suitable for full-size photovoltaic module testing
Independent UVA and UVB dual-band monitoring compliant with IEC standard requirements
High irradiance intensity effectively shortens test duration
Precise irradiance uniformity control ensures consistency and comparability of test results
Real-time module surface temperature monitoring prevents non-UV-related thermal degradation
Extremely low ozone generation avoids additional material aging effects
Touchscreen human–machine interface enables intuitive parameter setting and traceable operation status
Accessories
(1)Xenon lamp set (standard configuration)
(2)UVA fiber-optic probe (320–385 nm)
(3)UVB fiber-optic probe (280–320 nm)
(4)High-precision surface temperature sensor
(5)Control system (touchscreen and control module)
(6)Dedicated power supply and connection components
在线联系供应商
Other supplier products
 |
Aircraft Non-Metallic Material Flammability Tester Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Key Parameters Parameter CategorySpecif... |
 |
Water-Filled Dummy for Automotive Crash and Safety Testing | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards Toyota, Honda, Nissan; Mercedes-Benz, BMW, Volkswagen; General Motors, Ford; Hyu... |
 |
Particle Strength Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Particle Strength Tester is a high-precision instrument designed to measure the mechani... |
 |
In-situ Gas Analysis System for Lithium Battery Thermal Runaway，thermal runaway gas monitoring system | Whats/App: +86 156 1874 6768 Web: standard-groups.com The In-situ Gas Analysis System for Lithium Battery Thermal Runaway is an advanced testing ... |
 |
ASTM D3702 Load-Controlled Friction and Wear Testing Machine for Tribology Research | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Load-Controlled Friction and Wear Testing Machine is designed for compreh... |
Same products
 |
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 | 卖方: 863048 | 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，... |
 |
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 | 卖方: 863048 | 迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | 卖方: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | 卖方: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
 |
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner | 卖方: Beijing JCZ Technology Co., Ltd | The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las... |
