Wire Fire Resistance Test Machine, IEC 60331， Fireproof Testing for Cable Insulation
Description:
Fire-resistant cable refers to the cable that can keep a safe running time in the case of flame combustion.
TESTECH Fire Resistance Tester is designed according to the requirements of IEC60331-11.and used to obtain the refractory characteristics of a fire resistant cable or optical cable under flame conditions.
Standards:
• IEC 60331 Part 11
• IEC 60331 Part 21
User' s Experience:
1. This cabinet is made of stainless steel, anti-smoke and gas corrosion.
2. The control system is designed with a high degree of automation, automatic ignition, temperature and time digital display, convenient to observe and record, stable and reliable.
Main Features:
1. All fixtures are made of stainless steel;
2. The burner is a belt type propane blowtorch with a Venturi mixer, and the burner nozzle is length 500mm, width 15mm;
3. Those burning holes are staggered into 3 rows, and the front width is 15mm, holes diameter is 1.32mm and these holes center distance is 3.2mm;
5. One end of the specimen holder is equipped with a clamp to fix the sample, and the other end is convenient for heat transfer along the longitudinal specimen;
6. The cable sample is supported by two metal rings, and the middle length of the two rings is about 300mm;
7. An inner diameter of the sample supporting metal rings is 150mm, and the cross-sectional diameter of the ring is 10 ± 2mm.
8. The position of the burner torch from burning the bottom is not less than 200mm, and not less than 300mm from the tank wall.
Combustion System:
1. Independent standard electrical control platform;
2. With intelligent detection function, when a short circuit in the sample during the test, automatic alarm and turn off the fire source.
3. Fuse current in the experimental circuit is 2A;
4. The sample is applied to power of AV 100V ~ 1000V adjustable;
5. The time can be set free for the fire, the time recommended by standards is 90min.
Device parameters:
1. Voltage: AC 380V 3-phase, 50 / 60Hz, 30A;
2. The input voltage 0 ~ 1000V; can be adjusted;
3. The breakdown current is 2A;
4. Maximum power: 5000VA;
5. Timer: 0 ~ 999min
6. The flame temperature of 0 ~ 1100 ºC adjustable;
7. The test load current is 0.25A, can be adjusted;
Specification:
| Model | STD-IEC60331A |
| Size | 1.600 (W) × 850 (D) × 1.650 (H) mm |
| Console Size | 600 (W) × 750 (D) × 1.200 (H) mm |
| Power | AC 380V 3-phase, 50 / 60Hz, 30A |
| Weight | 300kg |
| Manual | Supplied |
在线联系供应商
Other supplier products
 |
Contact Heat Transmission Tester | The Protective Clothing Thermal Conductivity Tester is a specialized device used to evaluate the thermal conductivity performance of thermal insula... |
 |
Battery Isothermal Calorimeter | Product Description Battery Isothermal Calorimeter is a professional instrument developed based on the principle of power compensation isothermal ... |
 |
Fabric Wrinkle Bending Tester | Overview The Fabric Wrinkle Bending Tester is a specialized instrument used to assess the wrinkle recovery properties of various textile fabrics. ... |
 |
Humidifying Bottle Performance Tester | The Humidifying Bottle Performance Tester is used to test items such as leakage, pressure resistance, humidification output, and overflow of humidi... |
 |
Aluminum Tube Internal Coating Continuity Tester | The Aluminum Tube Internal Coating Continuity Tester is an important device specifically designed for testing the continuity of the internal coatin... |
