Non Stick Surface Scratch Resistance Tester
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Non Stick Surface Scratch Resistance Tester is designed to evaluate the scratch and wear resistance of non-stick cookware surfaces. It simulates repetitive handling and mechanical stress by applying controlled loads through a stylus or test pin, performing continuous cycles of movement on the cookware surface. The system ensures that handles and connection components withstand up to 15.000 cycles without deformation or loosening, providing a reliable assessment of durability and coating integrity.
Application
Primary applications
Scratch and wear resistance testing for non-stick cookware
Life-cycle testing of handles, connectors, and moving components
Quality control and material verification for cookware production
Verification of coating durability under repeated mechanical stress
Typical tested products
Non-stick frying pans and pots
Cookware handles and attachments
Ceramic-coated and polymer-coated cookware
Standards
(1) BS7069 Annex A.3 – Scratch resistance test method for non-stick cookware coatings
(2) GB/T 32095.2-2015 – Cookware: Non-stick surface performance and testing, Part 2: Wear and scratch resistance
(3) GB/T 1768-2006 – Paint film wear resistance measurement
(4) GB/T 6739-2006 – Paint film hardness by pencil method
(5) GB/T 23989-2009 – Coating scratch resistance determination
(6) ISO 20502 – Fine ceramics – Scratch resistance evaluation
(7) ISO 6508 – Metallic materials – Rockwell hardness test
(8) ASTM C1624 – Scratch resistance and adhesion testing of ceramic coatings
(9) ASTM D3363 – Pencil hardness testing of coatings
(10) ASTM D7027 – Scratch resistance evaluation of polymer coatings
(11) ASTM G171 – Scratch hardness determination of materials
(12) DIN EN ISO 1518-1 – Scratch resistance measurement of paints and varnishes
(13) DIN EN 1071-3 – Scratch resistance of advanced ceramic materials
Parameters
| Item | Specification |
|---|---|
| Stylus material | Tungsten steel ball tip |
| Stylus diameter | 1 mm |
| Applied load | 5 N ±0.1 N |
| Scratch speed | 0.08 m/s ±0.01 m/s |
| Scratch travel | ≥ 80 mm per stroke |
| Machine dimensions | 700 mm (L) × 350 mm (W) × 404 mm (H) |
| Heating requirement | Non-stick cookware heated to 220 ±5℃ on a 1500 W electric plate (diameter 180 ±20 mm) |
Features
Provides highly repeatable and controlled scratch testing for cookware surfaces.
Supports continuous cyclic testing up to 15.000 strokes without damaging handles or connectors.
Tungsten steel stylus ensures durability and consistent scratch application.
Adjustable speed and stroke length for precise simulation of real usage conditions.
Compatible with infrared non-contact temperature measurement for accurate surface heating.
Compact, robust design suitable for laboratory or production line testing.
在线联系供应商
Other supplier products
 |
Fabric Fiber Shedding Degree Tester (Friction) | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Fabric Fiber Shedding Degree Tester (Friction) is an instrument used to evaluate the li... |
 |
E-bike chassis dynamometer testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Electric bicycles are complex systems involving mechanical, electrical, and control compone... |
 |
Electrical bushing flame retardant tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: The flame retardant test instrument for electrical bushing is used t... |
 |
STD-FB3-A industrial compression stiffness tester for flexible material research applications | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards This instrument supports testing according to the following nation... |
 |
Damp heat test chamber for solar panels IEC standard | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Photovoltaic Module Damp Heat Test Chamber is designed to simulate long-term tropical a... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
