Low-Load Wear Testing Machine for ASTM D1894 Standard Tribology Analysis
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Low-Load Wear Testing Machine is specifically designed to measure wear behavior under extremely small loads that were previously difficult to evaluate. With a measurable load range starting as low as 0.1 g and extending up to 10 kg, this system enables precise wear analysis of thin films, surface treatments, and delicate materials. A high-speed, low-vibration rotating table ensures stable operation, making the instrument suitable for accurate and reproducible low-load wear testing.
Standards
The system supports test methods aligned with the following international and industry standards:
GB/T 6040-2008 (Test Method for Wear Resistance of Metal Surfaces)
GB/T 10375-2008 (Tribological Test Methods — Reciprocating Friction and Wear)
GB/T 17657-2022 (Test Methods for Properties of Wood-Based Panels)
ISO 12137-2 (Determination of Abrasion Resistance of Coated Fabrics and Films)
ISO 20502 (Fine Ceramics and Coatings — Scratch and Wear Testing under Micro Load)
ISO 1518-2 (Paints and Varnishes — Determination of Scratch Resistance)
ASTM D3702 (Wear Resistance of Polymers and Composite Materials)
ASTM D1044 (Taber Abrasion Resistance of Plastic Materials)
ASTM D1894 (Coefficient of Friction of Plastic Films and Sheeting)
JIS L 0849 (Wear Resistance Test of Plastic Products — Micro Load)
JIS L 0823 (Abrasion Resistance of Plastic Films and Sheets)
JIS P 8139 (Determination of Friction and Wear Properties of Coatings)
Parameters
| Parameter Category | Specification |
|---|---|
| Main structure | Drive unit and measurement unit separated |
| Turntable size | Ø80 mm |
| Specimen fixing (turntable) | Center bolt fixing, adjustable to specimen shape |
| Optional fixing method | Vacuum chuck |
| Upper specimen fixing | Dedicated fixture, adjustable to specimen shape |
| Turntable speed | 30–3000 rpm |
| Rotation counter | Accumulative counter, max. 9.999.999.999 cycles |
| Auto-stop function | Stops at preset cycles, up to 9.999.999 cycles |
| Load method / range | Leaf spring displacement method / 0.1–10 g |
| Friction force measurement | Load cell method, max. 1 N (interchangeable) |
| Wear measurement | Eddy-current displacement sensor, accuracy 3 μm |
| Pivot movement range | Vertical adjustment 10–30 mm |
| Data analysis system | General-purpose friction and wear analysis software |
Features
Ultra-low load measurement capability starting from 0.1 g
Wide load range up to 10 kg for diverse wear testing requirements
High-speed rotating table with low vibration to ensure stable micro-load measurement
Separation of drive and measurement units minimizes vibration interference
Optional vacuum chuck maintains rotational balance without damaging specimens
Integrated displacement sensor enables direct and simple wear depth measurement
Leaf-spring loading mechanism combined with load cell calibration ensures high measurement accuracy
在线联系供应商
Other supplier products
 |
ISO 1518 Surface Scratch Resistance Testing Machine for Paint Coatings | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Surface Scratch Resistance Testing Machine is designed to evaluate the sc... |
 |
Heavy-duty reciprocating friction and wear testing | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Materials testing: metals, ceramics, coatings, plastics, rubber, and other mat... |
 |
High Efficiency Oil Water Separation Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO/TS 16332-2006 – Method for evaluating fuel water separation efficiency... |
 |
Safety Helmets Acceleration Impact & Penetration Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6... |
 |
Coatings Shear tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0856-2011 (China): Specifies mechanical testing protocols for metal angular ... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
