CE Certified Block-on-Ring Test Machine for Quality Control
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Block-on-Ring Test Machine is a tribological testing system designed to evaluate friction and wear performance under stable line-contact conditions. Using aBlock-on-Ringcontact configuration, the system maintains constant linear contact and steady rotational speed, allowing you to reliably simulate real industrial contact conditions.The machine supports dry and lubricated friction testing for lubricants, coatings, polymers, ceramics, and composite materials. A pneumatic loading system and programmable control enable stepwise or ramped control of load, speed, temperature, and motion mode, ensuring repeatable and standardized wear testing.
Standards
The system is suitable for testing in accordance with the following international standards and methods:
(1) ASTM D2509 — Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease
(2) ASTM D2714 — Standard Guide for Calibration and Operation of Ring-on-Block Wear Test Machines
(3) ASTM D2782 — Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids
(4) ASTM D2981 — Standard Test Method for Evaluation of Solid Lubricant Films under Oscillating Motion
(5) ASTM D3704 — Standard Test Method for Wear Characteristics of Lubricating Grease under Oscillating Motion
(6) ASTM G77 — Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Ring-on-Block Geometry
(7) ASTM G137 — Standard Test Method for Ranking Resistance of Polymeric Materials to Sliding Wear Using Ring-on-Block Geometry
(8) Proposed STM — Wear Testing of Dry Film Solid Lubricants under Unidirectional Motion
Parameters
| Item | Technical Parameters |
|---|---|
| Speed range | Standard: 60–3.600 RPM; Optional: 0.5–7.200 RPM |
| Linear speed | Automatically calculated from shaft speed; programmable RPM setpoints, ramp rates, cycles, and test sequences |
| Load range | Dual-zone pneumatic loading: Low load 10–100 lbs; High load 50–1.300 lbs |
| Temperature range | Standard chamber: Ambient to 200 °C; Optional pressure chamber: Ambient to 250 °C; External chiller for sub-ambient testing |
| Friction force measurement | Electronic load cell, standard range 0–250 lbs; optional low-load range 0–25 lbs |
| Motion modes | Unidirectional rotation or oscillating motion (5°–720°) |
| Test control mode | Time-based, cycle-based, or limit-based automatic shutdown |
| Power supply | 220 VAC, single phase, 50/60 Hz |
| Compressed air | 80 psig, clean and dry |
| Benchtop dimensions | 1.829 × 610 × 762 mm |
| Machine weight | 163 kg |
| Shipping dimensions | 1.220 × 1.016 × 1.067 mm |
| Shipping weight | 246 kg |
Features
(1) Stable line-contact configuration that avoids rapid contact pressure reduction common in point-contact testers
(2) Wide temperature control range supporting high-temperature and optional low-temperature wear testing
(3) Dual-zone pneumatic loading system covering low-load and high-load test requirements
(4) Programmable control of speed, load, temperature, oscillation angle, cycles, and test sequence
(5) High-precision electronic friction force measurement suitable for low-load testing
(6) Support for dry friction and lubricated testing with direct lubricant injection
(7) Multiple motion modes including unidirectional and oscillating motion
(8) Reliable simulation of industrial contact and wear conditions
Accessories
(1) StandardBlock-on-Ringadapter
(2) Inclined cylinder contact adapter
(3) Flat specimen contact adapter
(4) Point contact testing adapter
(5) Temperature-controlled test chamber
(6) Optional pressure test chamber
(7) External chiller for low-temperature testing
(8) Electronic load cell for friction force measurement
(9) PC-based control and data acquisition system
在线联系供应商
Other supplier products
 |
Laboratory Cornell Mattress Fatigue Testing Machine Complying with ASTM F1566 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features Large test platform suitable for King and California King mattresse... |
 |
Hydraulic Oil Precision Filter Tester，ISO 4406 hydraulic fluid precision filtration device | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Hydraulic Oil Precision Filter Tester is a specialized filtration device for processing... |
 |
ASTM D6830 Aerosol Sensor Test System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards This system complies with and supports: (1) GB/T 14295-2019 – Air filters... |
 |
Accurate snap button pull tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Snap Button Tester is a device specifically designed to test the durabili... |
 |
Waterproof socks testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Waterproof Socks Testing Machine is designed to evaluate the water resistance and water... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
