Universal Multifunction Tribology Test Machine
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Universal Multifunction Tribology Test Machine (UMT Series) is a versatile friction and wear testing system designed for comprehensive tribological evaluation in academic, research, and industrial laboratories. You can perform friction, wear, indentation, and scratch tests on a single platform while obtaining high-precision, repeatable, and reliable data.
The system supports extremely low friction coefficient measurement (down to 0.004) and enables rapid generation of Stribeck curves for in-depth lubricant and material performance analysis. Its modular architecture and interchangeable environmental chambers allow you to adapt the system to a wide range of operating conditions while maintaining compliance with major international testing standards.
Application
You can use this system for a wide variety of tribological and material performance evaluations, including:
Fundamental tribology research and surface performance characterization
Friction and wear testing of lubricating oils and greases
Tribological evaluation of metals, ceramics, polymers, composites, and coatings
Indentation and scratch testing for hardness, elastic modulus, and coating adhesion
Friction and wear testing under high temperature, low temperature, humidity, corrosive, and vacuum environments
Standardized testing in universities, research institutes, and industrial R&D laboratories
Typical tested products include lubricants, bearing materials, surface coatings, engineering plastics, ceramic components, and functional thin films.
Standards
The system is compatible with, but not limited to, the following international standards:
(1) ASTM G77 – Block-on-Ring Wear Testing
(2) ASTM G99 – Pin-on-Disk Wear Testing
(3) ASTM G132 – Ball-on-Three-Plate Wear Testing
(4) ASTM G119 – Reciprocating Sliding Wear Testing
(5) ASTM G203 – Reciprocating Wear of Materials
(6) ASTM G204 – Sliding Wear Under Controlled Conditions
(7) ASTM G206 – Oscillatory Wear Testing
(8) ASTM G133 – Linearly Reciprocating Ball-on-Flat Wear Testing
(9) ASTM G174 – Scratch Testing of Materials
(10) ASTM D3702 / ASTM D3704 / ASTM D2981 / ASTM D2509 – Lubricant and Grease Wear and EP Performance
Parameters
Motion Drive Modules
| Drive Type | Typical Applications | Speed / Frequency Range | Torque / Stroke | Applicable Standards |
|---|---|---|---|---|
| Rotary Drive | Ball-on-disk, pin-on-disk, disk-on-disk | 0.1 – 5,000 rpm | Torque up to 5 Nm | ASTM G99, ASTM G132, ASTM D3702 |
| Reciprocating Drive | Ball-on-flat, pin-on-flat, ring-on-sleeve | 0 – 60 Hz (20 Hz @ 25 mm, 40 Hz @ 12.5 mm, 60 Hz @ 2 mm) | Adjustable stroke | ASTM G119, ASTM G203, ASTM G204, ASTM G206 |
| Block-on-Ring Drive | Block-on-ring wear testing | 0.1 – 5,000 rpm | Torque up to 5 Nm | ASTM G77, ASTM D3704, ASTM D2981 |
| Linear Drive | Scratch, indentation, low-speed friction | 0.002 – 10 mm/s | Stroke up to 120 mm | ASTM G174, ASTM G133 |
Sensors and Measurement System
| Sensor Type | Range / Characteristics |
|---|---|
| 2D Force Sensors | Multiple options, measurement range from 1 mN to 2,000 N |
| Acoustic Emission Sensor | Detection of micro-cracks and friction-induced signals |
| Contact Resistance Sensor | Real-time contact state monitoring |
| Micro-Displacement Sensor | High-resolution displacement measurement for scratch and indentation tests |
Power and Interface
| Item | Specification |
|---|---|
| Power Supply | 220 V, single phase, 50/60 Hz |
| Communication Interface | USB connection |
| Control Computer | Standard PC, freely replaceable |
在线联系供应商
Other supplier products
 |
Air Flow Resistance Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Air Flow Resistance Tester is designed to quantitatively evaluate the air perm... |
 |
Medical Suture Line Diameter Tester YY 1116 | The Medical Suture Thread Diameter Tester is a specialized testing equipment used for measuring the diameter or linear diameter of medical suture t... |
 |
TTF tensile testing machine / TTF Tensile Tester | Product Introduction: The TTF tensile testing machine is designed to provide high and stable tensile forces in tensile tests. Mostly for toys Des... |
 |
Rapid screening Calorimeter | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The rapid - screening calorimeter is a professional calorimetric instrument for th... |
 |
Thermal cycle wet freezing testing machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Thermal Cycle Wet Freezing Testing Machine is designed for comprehensive envir... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | 卖方: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | 卖方: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | 卖方: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | 卖方: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
