Multifunctional Rapid Thermal Conductivity Tester

Get a quote：

Whats/App: +86 181 0160 0864

Web: gellowen.co.uk

Multifunctional Rapid Thermal Conductivity Tester is a multifunctional thermal property testing system based on the Transient Plane Source (TPS) method, also known as the Hot Disk technique. The instrument directly measures heat transfer behavior using a flat disk-shaped sensor, enabling fast and accurate determination of thermal conductivity and related thermal parameters. Compared with traditional steady-state methods, this technique effectively eliminates the influence of contact thermal resistance and requires minimal sample preparation. With wide applicability, short testing time, and reliable mathematical models for different material types, the system has become a widely adopted solution for thermal characterization of solids, powders, liquids, pastes, thin films, insulation materials, and anisotropic materials.

Application

The Multifunctional Rapid Thermal Conductivity Tester is suitable for thermal property evaluation across a wide range of materials and industrial or research applications, including but not limited to:

Metals and alloys (bulk samples, high thermal conductivity materials)

Graphite and thermally conductive fillers

Thermal interface materials such as thermal grease, silicone gel, and silicone rubber

Ceramics and inorganic materials

Geotechnical materials including soil, rock, and geological samplesPolymers and composite materials

Paper, textiles, foams, and concrete

Insulation and thermal barrier materials

Thin materials and films (thickness 0.01–1 mm)

Anisotropic materials with directional thermal properties

The system can measure thermal conductivity, thermal diffusivity, specific heat capacity, volumetric heat capacity, thermal effusivity, and thermal resistance for solid, powder, liquid, paste, coating, and layered materials.

Standards

The instrument is designed and operated in accordance with the following international and national standards:

ISO 22007-2:2008 / ISO 22007-2:2015：Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method

GB/T 32064-2015：Determination of thermal conductivity and thermal diffusivity — Transient plane heat source (TPS) method

Parameters

Item	Specification
Thermal conductivity range	0.001 – 500 W/(m·K)
Thermal conductivity resolution	0.0001 W/(m·K)
Thermal diffusivity range	0.1 – 100 m²/s
Thermal effusivity range	0.1 – 30 W/(m²·K)
Specific heat capacity range	0.1 – 5 kJ/(kg·°C)
Thermal resistance range	0.5 – 0.000005 mm²·K/W
Temperature measurement accuracy	≤ 0.001 °C
Relative measurement error	≤ 3%
Repeatability error	≤ 3%
Test time	1 – 120 s
Sample environment temperature	Standard: room temperature
Optional temperature range	–40 to 150 °C / –40 to 250 °C
Power supply	AC 220 V ±10%, 50/60 Hz
Total system power	< 500 W
Standard probe	Φ15 mm, –40 to 150 °C

Other supplier products

	Wool Shrinkage Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Type wool fold shrinkage tester is a precision instrument to determine the length ...
	50th Percentile Male Crash Test Dummy	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The 50th Percentile Male Crash Test Dummy is a biomechanical surrogate designed fo...
	Finger Tip Abrasion Tester	Get a quote： Whats/App: +86 181 0160 0864 The Finger Tip Abrasion Tester is designed to simulate human fingertip contact on a test specimen by ap...
	Photovoltaic module backplane peeling strength testing machine	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Photovoltaic Module Backplane Peeling Strength Testing Machine is a specialize...
	Catheter Airflow Resistance Tester	Compliance Standards YY0461 - 2003. etc. Main Uses The catheter airflow resistance tester is an important tool for evaluating the resistance of gas...

供应产品

Same products

	HDPE高速水冷双壁波纹管生产线	卖方: Shandong HUASU Plastic Technology Co.,Ltd.	机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功...
	PanEVAP & MVR system	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...