Safety Helmet Impact and Penetration Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Safety Helmet Acceleration Impact and Penetration Tester is a specialized testing machine designed to evaluate the protective performance of safety helmets. It measures a helmet’s resistance to impact and penetration under controlled conditions, recording parameters such as peak acceleration and force to ensure compliance with safety standards.
Application
The Safety Helmet Acceleration Impact and Penetration Tester is used to evaluate the impact resistance performance of safety helmets and to assess their protective capabilities.
Standards
Complies with the latest GB/T 2812-XXXX standard testing requirements.
Impact Test Technical Specifications
| Parameter | Specification |
|---|---|
| Base | Made of reinforced concrete with a mass not less than 500 kg |
| Numerical analysis system | Composed of a force sensor, single-axis acceleration sensor, data processing, display, and recording units; capable of force measurement impact tests |
| Overall machine height | Approximately 4.2 meters |
| Impact hammer | Weight 5.0 ± 0.1 kg, hemispherical impact surface, radius 50 ± 1 mm, material stainless steel |
| Impact height | 1000 ± 5 mm |
| Force sensor (specification) | Measurement range 0–20000 N, minimum frequency response 5 kHz |
| Force sensor inclusion | Force sensor included |
| Impact anvil | Flat anvil (diameter 130 ± 3 mm, thickness ≥ 15 mm), hemispherical anvil radius 48 ± 1 mm, hardness not less than HRC50 |
Impact Test Procedure
a) Determine the headform to be used according to the appendix requirements.
b) Mount the sample helmet on the headform as per manufacturer instructions.
c) Install the acceleration sensor inside the ball head and connect it via the ball arm to the sliding arm.
d) Install the flat anvil and ensure the helmet just contacts the anvil.
e) Adjust the contact point so that the free-fall distance to the flat anvil is 1380 ± 5 mm.
f) Release the headform and record the peak acceleration and cumulative time.
g) Select another point on the helmet for contact with the flat anvil.
h) Repeat steps (e)–(f).
i) Install the hemispherical anvil and ensure the helmet just contacts the hemispherical anvil.
j) Adjust the contact point so that the free-fall distance to the hemispherical anvil is 1020 ± 5 mm.
k) Release the headform and record the peak acceleration and cumulative time.
l) Select another point on the helmet for contact with the hemispherical anvil.
m) Repeat steps (j)–(k).
Penetration Test Technical Specifications
| Parameter | Specification |
|---|---|
| Penetration hammer weight | 3.0 ± 0.05 kg |
| Hammer tip angle | 60 ± 0.5° |
| Penetration cone length | 40 mm |
| Penetration cone diameter | 28 mm |
| Cone tip radius | 0.5 mm |
| Hardness | HRC 45–50 |
| Penetration height | 1000 ± 5 mm |
在线联系供应商
Other supplier products
 |
Pressure Transmission Flow Meter Test Instrument | The Pressure Transmission and Flow Tester is widely used in multiple fields and is mainly used to test the pressure transmission and flow performan... |
 |
Leakage Test System | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Test System for testing tightness and leackage for a high diversity of components ... |
 |
Thermal - Cold Cycle Testing Machine / Hot and Cold Thermal Cycling Testers | Standard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber). Adaptive Certification: ... |
 |
BBA-Grade Desktop/Vertical Solar Simulator for Photovoltaic Module Testing | Getaquote： Whats/App: +86 181 0160 0864 TheBBA-Grade Desktop/Vertical Solar Simulator for Photovoltaic Module Testingis a high-precision, laborat... |
 |
Aluminum Tube Internal Coating Continuity Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Aluminum Tube Internal Coating Continuity Tester is an important device specif... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
