Spinal Pedicle Screw-Rod System Compression Fatigue Testing Machine | ASTM F1717
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
(1)YY/T 0857
(2)YY/T 1560
(3)ASTM F1717
(4)ASTM F2706
These standards specify the materials and methods for static and fatigue testing of spinal implants in vertebral resection models to ensure evaluation at the highest level. Fatigue tests are conducted at a frequency of 5 Hz, load ratio R = 0.1. for 5 million cycles or until specimen failure.
The M-series electromagnetic devices offer precise sinusoidal load control and stable peak values, along with professional testing fixtures and standardized operating procedures (SOPs), to support mechanical performance analysis of spinal implants.
Application
The Spinal Pedicle Screw-Rod System Compression Fatigue Testing Machine is designed to evaluate the mechanical strength and fatigue performance of spinal fixation systems under repeated compressive loads. Typical applications include:
Orthopedic implant testing: Assess the compressive fatigue resistance of pedicle screw-rod constructs.
Quality control: Verify the reliability and consistency of manufactured spinal implants.
Research and development: Support optimization of implant design, materials, and structural performance.
Standards compliance: Conduct tests in accordance with ISO 12189. ASTM F1717. and other relevant international guidelines.
This machine ensures spinal fixation devices can withstand cyclic compressive forces experienced in the human body, reducing the risk of implant deformation or failure.
Product Features
Next-generation fatigue testing system with a large electromagnetic motor as the actuation core.
Direct-drive electromagnetic motor ensures stable operation, high repeatability, and precise force and displacement control.
Built-in electromagnetic actuator features low friction, high repeatability, high responsiveness, and fast speed.
Capable of tensile, compressive, bending, shear, creep, and relaxation tests.
Meets modern material testing requirements for high precision, high frequency, high stability, and durability.
Maintenance-free, oil-free, seal-free, long lifespan, highly integrated, easy to install, and space-saving.
Wide selection of clamps and accessories available.
Technical Specifications
| Parameter | Specification |
|---|---|
| Maximum Peak Load | 8500 N |
| Dynamic Peak Load | 6000 N |
| Static Peak Load | 4200 N |
| Machine Accuracy Class | 0.5 |
| Load Measurement Range | 0.4%–100% F.S. |
| Load Measurement Accuracy | ±0.2% of reading within measurement range |
| Maximum Fatigue Loading Frequency | 100 Hz |
| Axial Stroke | 30 mm |
| Displacement Resolution | 0.1 μm |
| Testing Space (upper-lower fixture clearance) | 0–950 mm |
| Net Weight | approx. 900 kg |
| Dimensions | approx. 1000 × 700 × 1800 mm |
| Optional Environmental Accessories | Water bath, high-temperature, low-temperature, humidity-controlled environments |
| Applications | Fatigue, fracture, and static testing of metals, polymers, and composite materials; Static and dynamic testing of surgical implants (trauma, joint, spinal, dental implants); Tensile fatigue testing of polymers; Crack propagation testing in rubber materials |
| Optional Fixtures | Mechanical tensile, compression, and bending fixtures; Dedicated femoral stem fixtures; Four-point bending fixtures; Spinal rod/screw fixtures; Tibial plateau fixtures; Vertebral resection model compression/tension fixtures; Dental implant fixtures |
Accessories
(1)Specimen Fixtures: Hold pedicle screw-rod constructs securely for compressive fatigue testing.
(2)Actuator/Load Frame: Applies cyclic compressive loads with precise control.
(3)Data Acquisition System: Monitors and records force, displacement, and fatigue cycles.
(4)Calibration Tools: Ensure accuracy of force sensors and displacement measurements.
在线联系供应商
Other supplier products
 |
Flame spread tester for thermal and acoustic insulation materials | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply this tester in the following scenarios: Aerospace material test... |
 |
ISO 6722 Automotive Wire Flame Resistance Test Equipment Supplier Factory Direct | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Dual testing modes: vertical and horizontal flame tests. (2) A... |
 |
Fabric Fiber Shedding Degree Tester (Friction) Manufacturer Direct Sale | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features Touch screen controller: The number of frictions can be set arbitra... |
 |
Salt Spray Corrosion Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This chamber is widely used in industries and laboratories to assess corrosion... |
 |
Toy Flammability Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheToy Flammability Testeris designed to evaluate the flame resistance of children's appare... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
