.

Temperature Humidity Vibration Test Chamber Factory Direct

Get a quote:

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

JJF 1101 Calibration Specification for Temperature and Humidity of Environmental Test Equipment

GB/T 5170 Inspection Methods for Environmental Test Equipment for Electrical and Electronic Products

Features

ombined temperature, humidity, and vibration testing to simulate real-world multi-stress environments

High-performance transparent wave door with excellent X-band transmission efficiency

Integrated absorbing wave materials to minimize electromagnetic reflection and standing wave interference

Wide temperature and humidity operating range suitable for extreme environmental testing

High thermal load capacity to support powered test samples during operation

Stable structural design ensuring long-term flatness and mechanical reliability

Parameters

CategoryItemSpecifications
Basic Specifications Nominal Inner Volume 9.5 m³
Inner Chamber Dimensions 2700mm × 1800mm × 1950mm (Depth × Width × Height)
Test Environment Conditions Ambient temperature: 25°C, relative humidity: ≤85% RH, cold water temperature: ≤28°C
Temperature Performance Temperature Range -70°C ~ +100°C
Temperature Fluctuation ≤±0.5°C
Temperature Deviation ≤±2°C
Temperature Uniformity ≤2°C
Temperature Ramp Rate - Heating: ≥10°C/min (equivalent load 1000kg, electric heating power 8kW, average across the whole range; ≥10°C/min from room temperature to -55°C, ≥10°C/min from -55°C to 70°C)- In the range of -55°C ~ +85°C, the chamber can withstand an internal heat load of 8000W- In the range of -55°C ~ +85°C, the chamber can withstand an internal heat load of 3500W and an internal cooling air supply of 100kg/h (air temperature: 2~35°C, dew point temperature: ≤40°C)
Humidity Performance Humidity Range 35% RH ~ 98% RH (adjustable within -20°C ~ 70°C)
Humidification Method Humidification via hot air passing through the test piece; alternating temperature and humidity (typical value: 30°C/60°C, RH95%, temperature change rate ≥85%); constant temperature and humidity (typical value: 35°C, 90% ~ 98%)
Humidity Deviation ≤±3% RH (when humidity >75% RH); ≤±5% RH (when humidity ≤75% RH)
Chamber Front Door Door Configuration Hermetic door with transparent viewport- Temperature resistance: -65°C ~ +105°C- Humidity resistance: 25% ~ 98% RHFunctional performance:1) Working frequency: X-band2) Temperature resistance range: -65°C ~ +105°C3) Humidity resistance range: 25% ~ 98% RH4) Wave transmission rate: >95%5) Standing wave ratio influence: <2%6) Power resistance: 10W/cm²7) Flatness: <2cm (diagonal), no deformation after fabrication8) Fixing method: High-strength adhesive bonding to the chamber frame
Chamber Front End Absorber Material (on Hermetic Door) - Wave transmission rate (X-band): >95% (on left, right, and upper sides)- Power resistance: 10W/cm²- Total mass loss (TWC): ≤0.6%- Volatile condensable material (CVCM): ≤

Accessories

The standard and optional accessories available for your test requirements include:

Vibration interface platform and mounting fixtures

High-strength adhesive bonding system for transparent wave door installation

High and low temperature resistant absorbing wave materials for internal chamber surfaces

Temperature and humidity sensors with calibration support

Safety protection and monitoring modules


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

ASTM Standard Reciprocating Abrasion Tester | Taber 5900 Wear & Mar Resistance Equipment
ASTM Standard Reciprocating Abrasion Tester | Taber 5900 Wear & Mar Resistance Equipment Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Features Reciprocating wear machine is usefor detecting the Scra...
Probe-Type Material Surface Wear Scar Tester
Probe-Type Material Surface Wear Scar Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The Probe-Type Material Surface Wear Scar Tester is a precision device designed for high-ac...
STD Battery short-circuit tester丨STD Battery short-circuit chamber
STD Battery short-circuit tester丨STD Battery short-circuit chamber Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction Battery Short Circuit Tester is a device that can be applied to the e...
AI-powered glass bottle internal pressure resistance tester equipment
AI-powered glass bottle internal pressure resistance tester equipment Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The internal pressure resistance tester for glass bottles is mainly used to e...
Diaper impurity testing machine
Diaper impurity testing machine Whats/App: +86 156 1874 6768 Web: standard-groups.com The Diaper Impurity Testing Machine is designed for visual inspection of disposable diapers...
供应产品

Same products

Laser Chuck
Laser Chuck 卖方: 00000 Laser Chuck Introduce foreign advanced technology and management concept, High precision pro...
Power Pallet Jack For Sale
Power Pallet Jack For Sale 卖方: Jinan Hulk Machinery Co., Ltd Power Pallet Jack For Sale Electric Pallet Truck For Sale As a supplier of power pallet jac...
Multi Directional Forklift For Sale
Multi Directional Forklift For Sale 卖方: Jinan Hulk Machinery Co., Ltd Multi Directional Forklift For Sale Multi Directional Forklift For Sale As a supplier of mu...
Narrow Aisle Forklift For Sale
Narrow Aisle Forklift For Sale 卖方: Jinan Hulk Machinery Co., Ltd Narrow Aisle Forklift For Sale Narrow Aisle Forklift For Sale As a supplier of , we provide...
Electric Order Picker Supplier
Electric Order Picker Supplier 卖方: Jinan Hulk Machinery Co., Ltd Electric Order Picker Supplier Electric Order Picker Supplier As an supplier, we offer a co...