ISO 105 Colorfastness to Rubbing Test Machine for Leather and Textile
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features and Advantages
Three Independent Stations: Allows simultaneous testing of multiple samples under the same or different conditions.
Customizable Test Loads: Each station supports 500 g standard load with additional 500 g optional weight.
Flexible Test Pads: Supports felt, rubber, abrasive paper, and fabric to simulate diverse abrasion scenarios.
Dry or Wet Testing: Accommodates water or synthetic perspiration for realistic material evaluation.
Accurate Color Assessment: Visual evaluation with gray scales under controlled lighting for standardized results.
Durable Construction: Non-corrosive aluminum and stainless steel components ensure long service life.
Adjustable Speed and Jog Controls: Fine-tune testing speed for specific protocols.
Operator Safety: Protective vented cover minimizes risk of injury during operation.
Friction Heat Management: Built-in down draft fan prevents temperature rise that could affect test accuracy.
High Reliability: Brushless motors and precision bearings ensure smooth, maintenance-free operation.
Technical Specifications
| Item | Specification |
|---|---|
| Number of Stations | 3 independently operated |
| Rubbing Finger Mass | 500 g per station |
| Additional Weight | 500 g optional |
| Rubbing Speed | 40 cycles per minute |
| Rubbing Distance | 35 mm |
| Clamp Separation | Minimum 80 mm |
| Specimen Stretch | Up to 25% linear pretension |
| Test Pads | Felt, rubber, abrasive paper, cotton fabric, or custom pads |
| Control System | Programmable count-up controller with automatic stop; adjustable jog and test speed |
| Mechanical Construction | Non-corrosive aluminum and solid stainless steel with powder coat and anodized finishes |
| Bearings | Precision ball and needle bearings |
| Safety Features | Vented protective cover to prevent pinch injuries |
| Heat Management | Down draft fan prevents friction heat buildup |
| Motors | High-quality brushless electric motors |
| Power Supply | Specified at time of purchase |
| Warranty | 1 year manufacturer’s warranty |
Test Procedures
Cut specimens and rubbing media according to the relevant standard and perform preconditioning if required.
Mount the specimen onto the clamp and apply the specified linear tension.
Select and install the felt pad or other specified rubbing medium.
Set the rubbing load, speed, and number of cycles.
Start the tester to perform dry or wet rubbing.
After completion, remove the specimen and rubbing medium.
Evaluate color change and color transfer using the grey scale under standard lighting conditions.
Record results and generate test documentation.
Maintenance Information
Regularly inspect felt pads and rubbing media; replace when worn or contaminated.
Keep clamps and rubbing heads clean to avoid cross-contamination between tests.
Periodically check fasteners, bearings, and drive components for proper operation.
Ensure the cooling fan is unobstructed to maintain thermal stability.
Store the instrument in a clean, dry environment when not in use.
在线联系供应商
Other supplier products
 |
Coating thickness gauge/film thickness gauge | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard Coating Thickness Gauge complies with international standards includingASTM B499,... |
 |
High and Low Temperature Humidity Test Chamber,IEC 62660 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications High and Low Temperature Humidity Test Chamber is designed for performance an... |
 |
Safety Helmet High Temperature Pre-Treatment Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com The safety helmet high-temperature pre-treatment chamber is manufactured according to the G... |
 |
China Photovoltaic Acid Mist Test Chamber Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards IEC 60068-2-42. IEC 60068-2-43. IEC 60068-2-60 GB/T 10125 Artific... |
 |
Measuring devices for nanoindentation | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Measuring hardness and elastic modulus of thin films, coatings, and composite... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
