ISO 105 Colorfastness to Rubbing Test Machine for Leather and Textile

Get a quote：

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Features and Advantages

Three Independent Stations: Allows simultaneous testing of multiple samples under the same or different conditions.

Customizable Test Loads: Each station supports 500 g standard load with additional 500 g optional weight.

Flexible Test Pads: Supports felt, rubber, abrasive paper, and fabric to simulate diverse abrasion scenarios.

Dry or Wet Testing: Accommodates water or synthetic perspiration for realistic material evaluation.

Accurate Color Assessment: Visual evaluation with gray scales under controlled lighting for standardized results.

Durable Construction: Non-corrosive aluminum and stainless steel components ensure long service life.

Adjustable Speed and Jog Controls: Fine-tune testing speed for specific protocols.

Operator Safety: Protective vented cover minimizes risk of injury during operation.

Friction Heat Management: Built-in down draft fan prevents temperature rise that could affect test accuracy.

High Reliability: Brushless motors and precision bearings ensure smooth, maintenance-free operation.

Technical Specifications

Item	Specification
Number of Stations	3 independently operated
Rubbing Finger Mass	500 g per station
Additional Weight	500 g optional
Rubbing Speed	40 cycles per minute
Rubbing Distance	35 mm
Clamp Separation	Minimum 80 mm
Specimen Stretch	Up to 25% linear pretension
Test Pads	Felt, rubber, abrasive paper, cotton fabric, or custom pads
Control System	Programmable count-up controller with automatic stop; adjustable jog and test speed
Mechanical Construction	Non-corrosive aluminum and solid stainless steel with powder coat and anodized finishes
Bearings	Precision ball and needle bearings
Safety Features	Vented protective cover to prevent pinch injuries
Heat Management	Down draft fan prevents friction heat buildup
Motors	High-quality brushless electric motors
Power Supply	Specified at time of purchase
Warranty	1 year manufacturer’s warranty

Test Procedures

Cut specimens and rubbing media according to the relevant standard and perform preconditioning if required.

Mount the specimen onto the clamp and apply the specified linear tension.

Select and install the felt pad or other specified rubbing medium.

Set the rubbing load, speed, and number of cycles.

Start the tester to perform dry or wet rubbing.

After completion, remove the specimen and rubbing medium.

Evaluate color change and color transfer using the grey scale under standard lighting conditions.

Record results and generate test documentation.

Maintenance Information

Regularly inspect felt pads and rubbing media; replace when worn or contaminated.

Keep clamps and rubbing heads clean to avoid cross-contamination between tests.

Periodically check fasteners, bearings, and drive components for proper operation.

Ensure the cooling fan is unobstructed to maintain thermal stability.

Store the instrument in a clean, dry environment when not in use.

Other supplier products

	Computerized Helmet Impact Evaluation System	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Scope This testing instrument is applicable to the impact - energy absorption ...
	Large Flame Flammability Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction The Flame Flammability Tester is developed according to the NFPA 701 Method 2...
	Pump and Valve Contamination Tolerance Tester， ISO 4406 Contamination Control Test Equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com Solid particle contamination is a major cause of wear, silting, stiction, leakage, and ulti...
	Flame Spread Calorimeter,ISO 12136	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Flame Spread Calorimeter is suitable for: Building materials: Evaluate fl...
	Industrial Dry Cleaning Machine,industrial garment steamer	Whats/App: +86 156 1874 6768 Web: standard-groups.com TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performanc...

All supplier products

Same products

	HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line	Seller: Shandong HUASU Plastic Technology Co.,Ltd.	The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...
	PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...