IEC 60695-11-5 Automotive Wire Flame Test Equipment Supplier Factory Direct
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
Needle Burner Design: Φ0.5mm inner hole, 45° tilt angle for precise flame application.
Smart Touch Interface: Programmable control of combustion time (0–999.9s), flame height (12±1mm), and gas flow.
Flame Calibration: Auto-measures temperature rise (100°C→700°C in 23.5±1.0s) with K-type thermocouple.
Sample Bed: White pine board (10mm) + silk paper layer for realistic ignition testing.
Large Chamber: >0.5 m³ (customizable to 0.75/1 m³) with black background (<20 Lux).
Exhaust System: 100mm diameter pipe with silent anti-backflow design.
Technical Parameters
| Parameter | Specification |
|---|---|
| Burner Specs | Stainless Steel; Inner Φ0.5±0.1mm; Outer Φ0.9mm; Length >35 mm |
| Flame Angle | Vertical (Calibration) / 45° (Test) |
| Combustion Gas | 95% Butane/Propane |
| Flame Temperature | 100–700°C (Rise Time: 23.5±1.0s) |
| Test Time | 0–999.9s (Adjustable; Default: 30s) |
| Burning Time Recording | 0–9999s (Automatic) |
| Chamber Volume | >0.5 m³ (900×590×1050 mm); Custom Options: 0.75/1 m³ |
| Exhaust Pipe | Φ100 mm |
| Control System | PLC + 7-inch Touchscreen |
| Dimensions (W×D×H) | 1120 × 520 × 1250 mm |
| Net Weight | 80 kg |
| Power Supply | AC 220V ±10%, 50Hz |
| Temperature Range |
0–1000°C (K-Type Thermocouple) |
Test Procedures
The operating procedure for the needle flame tester includes the following key steps:
Preparation: Ensure the instrument is in good condition, all components are present, and the power cord and connecting cables are intact.
Setting test parameters: Turn on the instrument's power, enter the main menu, and set test parameters such as temperature, time, and oxygen concentration.
Sample preparation: Place the sample on the test platform, ensuring the sample is flat and undamaged.
Starting the test: Press the "Start" button to begin the test. Observe the test process to ensure it proceeds smoothly.
Test completion: Press the "Stop" button to end the test. Adjust the angle of the needle flame gun so that the flame is applied vertically to the tested material.
During operation, operators should be familiar with the structure, principle, and operating method of the needle flame tester, ensure that the distance between the sample and the needle flame nozzle meets the requirements, and pay attention to safety to avoid accidents.
在线联系供应商
Other supplier products
 |
Smoke Detector Test Tunnel，Standard Smoke & Heat Detector Test Tunnel | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Smoke Fire Detector Threshold Test Chamber is suitable for: Threshold ver... |
 |
Horizontal/Vertical Flame Chamber UL 94 Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Description: This machine is designed according to plastic Materials flammability test; ... |
 |
Outdoor Exposure Test System with Operating Temperature Measurement and Solar Simulator | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This system is widely applied in photovoltaic performance testing and research... |
 |
Face Mask Tensile Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction: The test machine uses the integrated structure of the motor and the speed co... |
 |
Compression Fatigue Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0959-2014 (China): Specifies compression fatigue testing protocols for inter... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
