Glow Wire Tester | Automotive Wire Fire Resistance Test Equipment Manufacturer
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
Transparent safety door
The heat-resistant glass observation window allows the test to be observed at any time during the test while keeping the test free from external environmental disturbances.
Automatic heating, illumination, exhaust device
Glowing-wire automatic heating timing, equipped with automatic control of the glowing-wire contact position, precise control, convenient and reliable, and the test device is equipped with lighting and exhaust.
Intelligent touch screen control panel
The microcomputer control system is more efficient and reliable, and the programmable 7-inch color LCD touch screen realizes various functions such as control, detection, calculation and data display.
Stepping motor control - accurate moving speed
The moving speed of the sample is controlled by high-end stepping, which has high precision and long service life. In addition, the test device is equipped with flame ruler, and the flame height can be observed at any time during the test.
Sample rack dis-assembly type design
The sample holder of the test device can be removed for loading and cleaning,and it use physical pressure, which has precise pressure,convenient operation and high efficiency.
Parameters
|
Enclosure: It is equipped with observation window, inner black fireproof material coating. |
special standard ring, horizontal static Temperature sensing delay : 1.7S |
|
Control screen: Intelligent touch Observation window: transparent |
Transformer parameters: 500VA, secondary: 2.5V, 150A Sample load: 1.0N ± 0.1N |
|
Test speed: 10mm/s ~~25mm/sadjustable |
Glowing depth: 0~9mm can be preset |
|
End of test: buzzer sounds, test piece automatically detaches |
which is controlled by high-precision steppermotor. Glowing time: 0~99s |
|
Test cabinet size: 885mmX580 mm× 1000 mm |
Effective volume ofthe test area : ≥0.5m3 |
|
Pressure limiting depth: 7mm |
Exhaust pipe diameter: 100mm |
|
Testtemperature: room temperature~999C (adjustable) |
Physical dimension: 1000mm×650mm×1250mm |
|
Glowing-wire material: ¢4mm, Ni/Cr (80/20), |
Weight: 90kg |
|
Temperature measuring element: armored K-type thermocouple(¢0.5mm), -200~1300C, precision 1C |
Power supply: 220V 50Hz |
Test Procedures
The operating procedure for the hot-wire test apparatus includes the following steps:
Checking the instrument: Turn on the power switch and check if the instrument is functioning properly.
Setting the temperature: Adjust the temperature to the required test temperature and wait until the temperature display shows the desired temperature.
Starting the test: Press the start button to begin the test.
Observing the test sample: Observe the residue dropped from the test sample during combustion. Press the stop button immediately when the sample stops burning.
Recording the results: Record the flame height during combustion. At the end of the test, press the exhaust button to remove the smoke.
Cleaning the equipment: Turn off the power switch, remove the test sample, record the test results, clean the dirt inside the chamber, close the exhaust vent, and turn off the main power switch.
These steps ensure the accuracy and safety of the hot-wire test apparatus. Operators should receive regular training to ensure the reliability and comparability of the test results.
在线联系供应商
Other supplier products
 |
Automated carbon black content tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com A Carbon Black Content Tester is an instrument used to measure the carbon black content in ... |
 |
Low-Force Friction and Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system supports test methods aligned with the following international and in... |
 |
Fire Retardant Coatings Tester – Tunnel Method | Whats/App: +86 156 1874 6768 Web: standard-groups.com The fire retardant coating flame propagation tester is suitable for testing the flame propa... |
 |
Flooring VOC Emission Testing Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 16000-9(Indoor Air - Determination of Volatile Organic Compounds) ASTM D51... |
 |
Cabin Air Filter Performance Test | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Differential pressure test Analysis of fractional separation efficiencydust ... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
