Battery Slurry Resistance Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Silicon-based Negative Electrode Expansion In-situ Fast Screening System is designed for rapid and accurate evaluation of expansion behavior of silicon-based anode materials during charge and discharge processes. By adopting a coin-cell–referenced assembly concept, the system enables direct in-situ measurement of anode thickness expansion without the need for full cell fabrication. This significantly reduces sample preparation time, material consumption, and labor cost, providing an efficient screening tool for silicon-based anode R&D and material optimization.
Application
(1) In-situ expansion screening of silicon-based and silicon–carbon anode materials during electrochemical cycling.
(2) Comparative evaluation of expansion behavior under different compaction pressures.
(3) Fast performance screening of modified silicon–carbon materials in early-stage R&D.
(4) Expansion characterization of anode materials assembled in coin-cell–type, laminated, or pouch-type structures.
(5) Correlation analysis between anode swelling, structural stability, and electrochemical performance.
(6) Material selection and optimization for high-capacity lithium-ion battery anodes.
Standards
(1) RSS1100 – Internal standard for spring-loaded in-situ expansion screening system.
(2) RSS1200 – Internal standard for servo-controlled pressure in-situ expansion screening system.
(3) RSS1300 – Internal standard for multi-structure anode expansion evaluation.
(4) RSS1400 – Internal standard for high-pressure precision in-situ expansion measurement.
Features
(1) In-situ real-time characterization of silicon anode thickness expansion during charge and discharge.
(2) Four-channel synchronous testing to improve screening efficiency and data comparability.
(3) High-precision thickness measurement with sub-micron resolution.
(4) Multiple pressure control modes including spring loading and servo motor control.
(5) Compatibility with multiple cell structures including coin-type, laminated cells, and pouch cells.
(6) Visual operation interface with intuitive parameter setting and one-click data export.
(7) Direct anode-end expansion measurement without full cell assembly.
(8) Stable mechanical structure ensuring repeatable and reliable test results.
Parameters
| Model | RSS1100 | RSS1200 | RSS1300 | RSS1400 |
|---|---|---|---|---|
| Number of Channels | 4 | 4 | 4 | 4 |
| Pressure Control Mode | Spring loading | Servo motor | Servo motor | Servo motor |
| Pressure Range | Up to 5 kg | 1–100 kg | 1–100 kg | 1–100 kg |
| Pressure Accuracy / Resolution | ±0.1 kg | 0.1 kg / ±0.3% FS | 0.1 kg / ±0.3% FS | 0.1 kg / ±0.3% FS |
| Thickness Measurement Range | ±5 mm | ±5 mm | ±5 mm | ±5 mm |
| Thickness Resolution / Accuracy | 0.1 μm / ±1 μm | 0.1 μm / ±1 μm | 0.1 μm / ±1 μm | 0.1 μm / ±1 μm |
| System Error | ≤3% | ≤3% | ≤3% | ≤3% |
| Applicable Samples | Horizontal coin cells | Coin-type, laminated cells, pouch cells | ||
| Max Sample Size | — | — | — | ≤ 60 × 90 × 4 mm (customizable) |
Accessories
(1) In-situ expansion test fixtures for coin-type, laminated, and pouch cells.
(2) High-precision displacement sensors.
(3) Pressure loading modules (spring or servo-controlled).
(4) Data acquisition and analysis software.
(5) Visual operation interface and control unit.
(6) Calibration blocks for thickness and pressure verification.
在线联系供应商
Other supplier products
 |
Safety Helmet Electrical Insulation Tester GB/T2811 | Product Introduction: Safety hat electrical insulation performance tester used to test the electrical insulation performance of safety hat, high d... |
 |
Anti-glare Panel Falling Weight Tester JTG/T | Meet the standard GB/T24718-2023，GB/T 24718-2009，JTG/T D33-2012 Scope of application The anti-glare board impact testing machine is designed and... |
 |
Carpet Static Electricity Tester | Get a quote: Whats/App: +86 181 0160 0864Read the measurement on the charge meter. The Carpet Static Electricity Tester is a precision instrument... |
 |
Catheter Residual Vacuum Tester YY/T 0339 | Compliance Standards YY/T 0339 - 2019 Suction Catheters for the Respiratory Tract, etc. Main Uses The catheter residual vacuum tester is mainly ... |
 |
Thermal Comfort Environmental Chamber | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Thermal Comfort Environmental Chamber is a high-precision climate simulation s... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
