Safety Helmet Electrical Insulation Tester GB/T2811
Product Introduction:
Safety hat electrical insulation performance tester used to test the electrical insulation performance of safety hat, high degree of automation, easy to operate, widely used in safety hat manufacturers and major quality inspection units.
Meet the standard:
GB/T2812-2006 Safety helmet test method
GB/T2811-2007 Safety helmet
Product Features:
Plastic sink or water bath system designed to contain water and accommodate the safety helmet for testing in a wet condition, without interfering with electrical measurements.
Electrodes for applying high voltage to the safety helmet, including a probe with a specific diameter (4mm) and hemispherical top.
LED digital display providing real-time readouts of current and voltage values during the test.
Capability to apply high voltage according to a specific sequence: increasing the voltage to 1200V ± 25V within 1 minute and maintaining it for 15 seconds.
Voltage regulator with a range of 1500V to control the applied voltage.
Built-in timer to control the duration of the high-voltage application, with a specified error ($pm$1%).
Accurate measurement of current and voltage, with expression value errors of $pm$1%.
Configurable test head die or electrode to meet various helmet testing requirements.
High level of automation for the test procedure.
Safety features (implied for high voltage testing) to protect the operator.
Technical parameters:
1. the current expression value error of ±1%
2. voltage value error ±1%
3. timer value error ±1%
4. the diameter of the probe is 4mm, the top is hemispherical
5. The voltage is increased to 1200V±25V within 1min and maintained for 15s
6. voltage regulator: range 1500V
在线联系供应商
Other supplier products
 |
Image test standard transmission light box ISO 3664 | Standard CIE 15:2004: Adheres to colorimetry standards for spectral measurement. ISO 3664:2009: Compliant with viewing conditions for graphic art... |
 |
Shoelace Abrasion Tester / SATRA TM93 / QB/T2226 | Standards SATRA TM93、DIN-4843、QB/T2226、SATRA TM154 Principle Let shoelace cross the eyelet clamped on the fiber board, make the shoelace and eye... |
 |
Flex Durability Tester | The rubbing resistance tester is a device specifically used to detect the rubbing resistance performance of materials. The following is a detailed ... |
 |
Suture Needle Cutting Force Tester YY 0166 | The Cutting Force Tester for Suture Needles is a precision instrument specifically used to detect the force required by medical suture needles duri... |
 |
Carbon Black Dispersion Tester丨Carbon Black Dispersion Analyzer | Scope of application: STD DW1431 plastic carbon black dispersion measurement system is based on a professional image acquisition system and corres... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
