ASTM E119 Building Material Fire Tester Manufacturer
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Parameters:
| Item | Specification |
|---|---|
| Gas used - Methane flow rate | (35 ± 0.5) L/min, purity > 95% |
| Gas used - Air flow rate | (17 ± 0.2) L/min |
| Specimen size | 4 specimens per test group |
| Thermocouple type | Nickel-chromium-nickel-silicon, wire diameter 0.5mm, outer diameter ≤ 3mm |
| Furnace wall temperature range | Room temperature to 100°C, ±1°C |
| Intake temperature range | 0 to (50 ± 0.5)°C |
| Pressure difference range | 0 to 30Pa, ±1Pa |
| Pressure difference measurement range | 0-100Pa, accuracy 0.2% |
| Temperature recorder and thermostat | Multi-channel continuous temperature recording and curve display |
| Constant temperature | (23 ± 2)°C |
| Constant current | (10 ± 1) m³/min |
| Ambient temperature range | 19 to 30°C |
| Power supply | 380VAC 50HZ |
| Dimensions of combustion shaft furnace (outer) | 1020mm x 1020mm x 3930mm |
| Dimensions of combustion shaft furnace (inner) | 800mm x 800mm x 2000mm |
Installation conditions:
1 Indoor installation.
2 Combustion box dimensions 1290mm*1050mm*3950mm
3 Control cabinet size 2000mm*1050mm*850mm
4 Electricity supply: 220V 32A;
5 Gas: methane, 99% purity or above;
6 Compressed air: 0.6Mpa, de-oiled and de-watered;
在线联系供应商
Other supplier products
 |
Blade sharpness test machine for surgical needle | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The detection standards of the Sharpness and Strength Tester for Suture Needles ... |
 |
Vertical flame test chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction The Vertical Flammability Chamber, designed for American Standards, measures ... |
 |
Building material burning tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Technical specifications: TheBuilding material burning testeris designed and manufactured ... |
 |
Micro Rapid Closed Cup Flash Point Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Reference Standards： SH/T 0768. SN/T 3077.1. DL/T 1354. ASTM D6450 SN/T 3077.2. ASTM D7094... |
 |
Flame Propagation Test for a Single Insulated Cable IEC / EN 60332-1-2，EN 50086 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Description: This testermeetthe standards IEC 60332-1-1:2004 in the provisions of technic... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
