ISO 16890 Air Filter Test System for Gas Turbine Manufacturer
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Principle
A defined volume flow rate is sucked through a HEPA intake filter, the attached test duct and the safety filter. The test system is composed of 6 sections: aerosol inlet, upstream measurement, specimen holder, downstream measurement, safety filter and flow rate measurement. The measurement sections are equipped with ports for the aerosol characterization and the determination of the pressure drop.
Technical data
| Parameter | Unit | Value |
|---|---|---|
| Test flow rate | m³/h | 800 … 11.000 |
| Test aerosol | – | DEHS, KCl, Ashrae, ISO 12103-A2 (AC fine), ISO 12103-A4 (AC coarse) |
| Test specimen dimensions | – | 610 × 610 mm (pocket and cassette filters); diameter ≤ 400 mm, length ≤ 1500 mm (filter cartridges) |
| Differential pressure of test specimen | Pa | max. 2000 |
| Compressed air supply (operating gas/air) | bar | min. 5 (17 m³/h) |
| Water supply (operating medium) | bar | min. 3 |
| Power supply | – | 3 × 400 VAC, 125 A, 50 Hz |
| Air circulation | % | 0 … 100 |
| Sensors (others) | – | Temperature, relative humidity, air pressure |
| System dimensions (W × H × D) | m | 4.6 × 1.7 × 14.0 |
Features
Circulation mode for control of the test parameters temperature and humidity
Injection of different aerosols (NaCl, KCl, DEHS) into an optimal flow profile
Automated feeding of water droplets and supersaturated vapour
High level of automation, mostly automated test runs with complete operator guiding
Gas-Tight Test Ducts: Ensure accurate particle and gas measurements.
Modular Design: Accommodates different filter types and sizes.
High Automation: Software-driven sequences with automatic data acquisition.
Multi-Medium Testing: Supports various aerosols and pollutant gases.
Standardized Reporting: Automatically generates reports including differential pressure, dust loading, fractional efficiency, and salt removal efficiency.
Environmental Control: Built-in temperature and humidity sensors allow testing under controlled conditions.
Accessories
| Accessory / Consumable | Quantity | Description |
|---|---|---|
| DEHS Aerosol Generator | 1 | For fine aerosol particle testing |
| ASHRAE Dust Generator | 1 | For standardized dust loading tests |
| Optical Particle Counters | 2 | 0.2–10 μm, four channels |
| H14 Air Filter | 1 | For system calibration |
| Temperature & Humidity Sensors | 2 | Monitor test environment |
| Gas Analyzers | 3 | Measure NO₂, H₂SO₄, and other gases |
Operation Instructions
Safety:
Confirm power, gas, and water connections before testing.
Avoid direct exposure to aerosols and gases; ensure good ventilation.
Wear protective equipment when handling hazardous gases.
Standard-Specific Testing:
The system adjusts test conditions automatically according to ISO 16890. ISO 29461-2. or other relevant standards.
After testing, the system generates standardized reports.
在线联系供应商
Other supplier products
 |
Molten Metal Resistance & Impact Tester Industrial Equipment Factory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features Drop guide to collect the drops and to guide them towards the verti... |
 |
Carpet Abrasion Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D4157(Standard Test Method for Abrasion Resistance of Textile Fabrics (Osc... |
 |
Cleanliness Analysis System | Whats/App: +86 156 1874 6768 Web: standard-groups.com The cleanliness analysis system fully complies with the requirements of standards such as V... |
 |
Glass Bottle Internal Pressure Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The internal pressure resistance tester for glass bottles is a device specifically used to ... |
 |
Intramedullary Nails Four - point Bending Fatigue Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0591-2011: Chinese standard specifying bending fatigue test methods for intr... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
