Scan Heads
UltraScan products cover a comprehensive range of models, suitable for customers with high cost performance requirements and substitute imported similar products. The coating film selection of galvanometer mirror scanner is rich, UV, green, fiber, CO2 and other coating options. Driver board is using CLASS D power amplifier, high output power, small heating, small drift. The Extrascan is the Chinese first fully digital scanning galvanometer for high precision and drift requirements. The flexible FPGA-based digital driver board can be used for galvanometer motors with varying loads from 10mm to 30mm.
How does the galvoscan headswork?
The scan head can deflect the laser beam in the X and Y directions. This will create a two-dimensional planar area where the laser beam can be focused anywhere on this two-dimensional plane. This two-dimensional plane area is the marking range.
Laser beam deflection is achieved by two scanning galvanometer mirrors. The scan head has two holes, one for light input and another for light output. The laser beam enters the scan head from the input hole, and emit out from the output hole after deflected, as shown in Figure 1. Output hole open or install F-Theta scan lens or install protection window.
2-Axis VS. 3-Axis Galvo Scan Head
3-Axis Galvo Scan Head uses XY galvo and Z lens to form three-dimensional focusing technology, which solves the problem that the focal spot on the marking plane becomes larger and the marking line width is different because the focal plane is spherical and the workpiece surface is flat after the laser beam passes through the focusing mirror. By changing the position of the dynamic focusing mirror, its focus is still on the surface of the workpiece, so as to achieve the effect of the same diameter and small diameter of all the spots in the marking range.
Hansscannerprovides galvo scan head, galvanometer scanner, galvo scanner laserand etc. If you want to know more, please contact us.
在线联系供应商
Other supplier products
 |
Laser Control Card | GMC is a galvanometer motion laser control cardindependently developed by Shenzhen Hans ScannerS&T Co., LTD. GMC galvo controlcard embedded sof... |
 |
F-theta Lens | What is f theta lens Han's Scanner telecentric f theta lensseries products are the most commonly used parts in the laser field. After our continuo... |
 |
3-axis Galvo Scan Head | 3-axis Galvo Scan Head The large-format 3D laser scanner headis free of the processing range limits of 2D field lenses, and can be flexibly select... |
 |
VCM F1 | VCM F1 adopts the traditional voice coil motor design scheme, linear motor structure is simple, high stability. Using high precision grating ruler ... |
 |
Ultra-galvo Scanner | The galvanometer scanner laserusing photoelectric sensor as feedback system is characterized by high repetition accuracy and linearity, and high co... |
Same products
 |
Tube Laser Cutting Machine | 卖方: WUHAN REMCOR TECHNOLOGY CO.,LTD | Tube Laser Cutting Machine Remcor steel pipe laser cutting machine solutions can certainly meet a... |
 |
Sheet Metal Cutting Machine | 卖方: WUHAN REMCOR TECHNOLOGY CO.,LTD | Machine Used to Cut Sheet Metal Remcor fiber laser cutting machine can help to cut intricate sha... |
 |
Sheet And Tube Laser Cutting Machine | 卖方: WUHAN REMCOR TECHNOLOGY CO.,LTD | Sheet And Tube Laser Cutting Machine REMCOR SHEET&TUBE CUTTING MACHINE can meet the requir... |
 |
Panel Bender | 卖方: WUHAN REMCOR TECHNOLOGY CO.,LTD | Panel Bender As one of the panel bendermanufacturers in China, Remcor panel bender for salecan r... |
 |
Laser Cutting Machine | 卖方: WUHAN REMCOR TECHNOLOGY CO.,LTD | Laser Cutting Machine Remcor 18 years' experience factory provides Europe standard quality laser... |
